I wish the RP sorting had a mode like the BC sorting. Where it takes out what you tell it to and everything else just passes through and goes on its way. The current sorting machine with the "default" setting doesn't work anywhere near as well as the BC diamond pipe.
Not what I expected, but at least we are getting somewhere. The next thing I need you to try is replacing the mod block IDs with a vanilla block. I've done it for you; just temporarily remove all of your stuff from the config and replace it with this:
So Changing them to vanilla blocks works, the FPS is normal. I then added IC2 and Factorization veins to see if it would reduce performance and it didn't seem to. So that means it's the metallurgy blocks causing the FPS drop when using COG to generate them.... why?
For starters, I need to know if it is primarily the Veins or the Substitutes that are lagging. Try commenting out and see if that makes a difference, then repeat with the other. Then try commenting out the Veins+Substitute entries for each mod in turn to see if any one mod is responsible. Let me know the results, and we will take it from there.
Ok so I narrowed it down a bit, but not much.
The substitutes cause no FPS drop at all.
The veins cause all the FPS drop, but it doesn't matter what mods it's generating blocks from.
I remove half the veins, FPS doubles. I remove all the veins, FPS is normal.
The more veins in the config, the more FPS drop there is.
Tried a bunch of other stuff that had no effect. Here is the current config, am I missing something?
I have not been able to reproduce this issue on my end. Using the config you originally posted did not have any noticeable effect on the performance of my game. The lag may be due to mod interaction, or not related to COG at all, or perhaps it's something that I haven't thought of - as I said above, I will need more information before I can be of any help.
What information do you need? I have tested this on many different machines, the problem persists. The problem only exists when I have added new ores to the COG config otherwise everything is normal.
Also, fixed a problem with case sensitivity in the client command security check (keeping folks that were opped from being detected as such).
Alpha 4 fixed the problem and thanks for the Metallurgy support!
Ok, I asked about this before or at least mentioned it, but I checked back through the thread and can't find my post or your response so I'm just going to ask again.
Is there an easier way to disable a specific view (specifically underground)? I have been commenting out everything that has "Cave" in it. This was working before alpha4, but now the server overwrites my comments with a new file and continues displaying Cave mapping.
I'm seeing a number of exceptions that have nothing to do with us - is this a case where you cannot issue commands from the client (as you previously reported)?
Yes, I cannot do any dynmap commands. it says permission denied as you can see.. I am opped.
I want to use Custom Ore Generation with this. How can I disable metallurgy ore generation so that I can use COG to do this instead, while keeping the functions of all metallurgy or intact?
So I set all ore counts to 0 and vein counts to 0 and all spawnable ore to false. Yet metallurgy still spawns all the ore in the world.. wtf?
The easiest way to do this is to set all ores to spawn only in invalid dimensionIDs. So all of them only spawn in DimID-2 or something like that(barring use of the Mystcraft /Myst-Create command, mind you). Then set all of them to spawn with Custom Ore Generation.
Though I should warn you, Metallurgy adds a LOT of new ores, so you may have a hell of a Debugging Party on your hands. Might just be better to use BoG for vanilla dimensions and the Mystcraft addon for this mod, and set all the valid dimensionIDs for this mod to -2.(really, any negative number below 1 will work most of the time, save for /Myst-Create and mods which occupy that DimID)
ummm.. what? lol... you want me to do what with the what in the where with the what now? I mentioned nothing about mystcraft.
I want to use Custom Ore Generation with this. How can I disable metallurgy ore generation so that I can use COG to do this instead, while keeping the functions of all metallurgy or intact?
I see that you're on 4.2.8 versus 4.2.5 Forge - I'll give that a try, and see if that might be related to why you have issues and I don't.
Edit: my bad - that was the Modloader versiion - I see that you're on 6.0.1.355. Are you sure that your user is "opped"?
I'm using 6.0.1.350 which is the recommended version of forge. Yes, my user is opped in the ops.txt
You have added a lot of distributions, but they are not nearly enough to cause that kind of performance drain. I also find it hard to believe that you can get 3000+ FPS under any conditions. What kind of machine are you using?
Default ores without wireframes and debugging mode = normal
Default ores with wireframes and debugging mode = normal
I disabled Metallurgy ore generation (or at least set it all to 0 so no ore is placed in the world) and then removed all the substitutes for Metallurgy which is a huge chunk of it.
My ores without wireframes and debugging mode = 8 FPS
My ores with wireframes and debugging mode = 3 FPS
My machine specs:
AMD FX-8350 4Ghz
32G G.Skill 1600Mhz
EVGA GTX 690
2x Raid0 Cheeta Hybrid 750G for main drive
I've had 3 other people test it with different specs and everyone is having the same problem. Any time my config is used the FPS is horrible.
0
0
So Changing them to vanilla blocks works, the FPS is normal. I then added IC2 and Factorization veins to see if it would reduce performance and it didn't seem to. So that means it's the metallurgy blocks causing the FPS drop when using COG to generate them.... why?
0
Ok so I narrowed it down a bit, but not much.
The substitutes cause no FPS drop at all.
The veins cause all the FPS drop, but it doesn't matter what mods it's generating blocks from.
I remove half the veins, FPS doubles. I remove all the veins, FPS is normal.
The more veins in the config, the more FPS drop there is.
Tried a bunch of other stuff that had no effect. Here is the current config, am I missing something?
<Veins block='901:0' inherits='PresetLayeredVeins'>
<Setting name='MotherlodeFrequency' avg='0.1'/>
<Setting name='MotherlodeHeight' avg='64' range='64'/>
<Replaces block='stone'/>
</Veins>
<Veins block='901:1' inherits='PresetLayeredVeins'>
<Setting name='MotherlodeFrequency' avg='0.083'/>
<Setting name='MotherlodeHeight' avg='64' range='64'/>
<Replaces block='stone'/>
</Veins>
<Veins block='901:2' inherits='PresetLayeredVeins'>
<Setting name='MotherlodeFrequency' avg='0.025'/>
<Setting name='MotherlodeHeight' avg='64' range='64'/>
<Replaces block='stone'/>
</Veins>
<Veins block='910' inherits='PresetLayeredVeins'>
<Setting name='MotherlodeFrequency' avg='0.025'/>
<Setting name='MotherlodeHeight' avg='32' range='16'/>
<Replaces block='stone'/>
</Veins>
<Veins block='910:1' inherits='PresetLayeredVeins'>
<Setting name='MotherlodeFrequency' avg='0.025'/>
<Setting name='MotherlodeHeight' avg='32' range='16'/>
<Replaces block='stone'/>
</Veins>
<Veins block='910:2' inherits='PresetLayeredVeins'>
<Setting name='MotherlodeFrequency' avg='0.025'/>
<Setting name='MotherlodeHeight' avg='32' range='16'/>
<Replaces block='stone'/>
</Veins>
<Veins block='119:0' inherits='PresetLayeredVeins'>
<Setting name='MotherlodeFrequency' avg='0.025'/>
<Setting name='MotherlodeHeight' avg='32' range='16'/>
<Replaces block='stone'/>
</Veins>
<Veins block='119:1' inherits='PresetLayeredVeins'>
<Setting name='MotherlodeFrequency' avg='0.025'/>
<Setting name='MotherlodeHeight' avg='32' range='16'/>
<Replaces block='stone'/>
</Veins>
<Veins block='119:2' inherits='PresetLayeredVeins'>
<Setting name='MotherlodeFrequency' avg='0.025'/>
<Setting name='MotherlodeHeight' avg='32' range='16'/>
<Replaces block='stone'/>
</Veins>
<Veins block='119:3' inherits='PresetLayeredVeins'>
<Setting name='MotherlodeFrequency' avg='0.025'/>
<Setting name='MotherlodeHeight' avg='32' range='16'/>
<Replaces block='stone'/>
</Veins>
<Veins block='119:4' inherits='PresetLayeredVeins'>
<Setting name='MotherlodeFrequency' avg='0.025'/>
<Setting name='MotherlodeHeight' avg='32' range='16'/>
<Replaces block='stone'/>
</Veins>
<Veins block='119:5' inherits='PresetLayeredVeins'>
<Setting name='MotherlodeFrequency' avg='0.025'/>
<Setting name='MotherlodeHeight' avg='32' range='16'/>
<Replaces block='stone'/>
</Veins>
<Veins block='119:6' inherits='PresetLayeredVeins'>
<Setting name='MotherlodeFrequency' avg='0.025'/>
<Setting name='MotherlodeHeight' avg='32' range='16'/>
<Replaces block='stone'/>
</Veins>
<Veins block='119:7' inherits='PresetLayeredVeins'>
<Setting name='MotherlodeFrequency' avg='0.025'/>
<Setting name='MotherlodeHeight' avg='32' range='16'/>
<Replaces block='stone'/>
</Veins>
<Veins block='119:8' inherits='PresetLayeredVeins'>
<Setting name='MotherlodeFrequency' avg='0.025'/>
<Setting name='MotherlodeHeight' avg='32' range='16'/>
<Replaces block='stone'/>
</Veins>
<Veins block='119:9' inherits='PresetLayeredVeins'>
<Setting name='MotherlodeFrequency' avg='0.025'/>
<Setting name='MotherlodeHeight' avg='32' range='16'/>
<Replaces block='stone'/>
</Veins>
<Veins block='119:10' inherits='PresetLayeredVeins'>
<Setting name='MotherlodeFrequency' avg='0.025'/>
<Setting name='MotherlodeHeight' avg='32' range='16'/>
<Replaces block='stone'/>
</Veins>
<Veins block='119:11' inherits='PresetLayeredVeins'>
<Setting name='MotherlodeFrequency' avg='0.025'/>
<Setting name='MotherlodeHeight' avg='32' range='16'/>
<Replaces block='stone'/>
</Veins>
<Veins block='923:0' inherits='PresetLayeredVeins'>
<Setting name='MotherlodeFrequency' avg='0.025'/>
<Setting name='MotherlodeHeight' avg='32' range='16'/>
<Replaces block='stone'/>
</Veins>
<Veins block='923:1' inherits='PresetLayeredVeins'>
<Setting name='MotherlodeFrequency' avg='0.025'/>
<Setting name='MotherlodeHeight' avg='32' range='16'/>
<Replaces block='stone'/>
</Veins>
<Veins block='923:2' inherits='PresetLayeredVeins'>
<Setting name='MotherlodeFrequency' avg='0.025'/>
<Setting name='MotherlodeHeight' avg='32' range='16'/>
<Replaces block='stone'/>
</Veins>
<Veins block='923:3' inherits='PresetLayeredVeins'>
<Setting name='MotherlodeFrequency' avg='0.025'/>
<Setting name='MotherlodeHeight' avg='32' range='16'/>
<Replaces block='stone'/>
</Veins>
<Veins block='923:4' inherits='PresetLayeredVeins'>
<Setting name='MotherlodeFrequency' avg='0.025'/>
<Setting name='MotherlodeHeight' avg='32' range='16'/>
<Replaces block='stone'/>
</Veins>
<Veins block='923:5' inherits='PresetLayeredVeins'>
<Setting name='MotherlodeFrequency' avg='0.025'/>
<Setting name='MotherlodeHeight' avg='32' range='16'/>
<Replaces block='stone'/>
</Veins>
<Veins block='915:0' inherits='PresetLayeredVeins'>
<Setting name='MotherlodeFrequency' avg='0.025'/>
<Setting name='MotherlodeHeight' avg='32' range='16'/>
<Replaces block='hellrock'/>
</Veins>
<Veins block='915:1' inherits='PresetLayeredVeins'>
<Setting name='MotherlodeFrequency' avg='0.025'/>
<Setting name='MotherlodeHeight' avg='32' range='16'/>
<Replaces block='hellrock'/>
</Veins>
<Veins block='915:2' inherits='PresetLayeredVeins'>
<Setting name='MotherlodeFrequency' avg='0.025'/>
<Setting name='MotherlodeHeight' avg='32' range='16'/>
<Replaces block='hellrock'/>
</Veins>
<Veins block='915:3' inherits='PresetLayeredVeins'>
<Setting name='MotherlodeFrequency' avg='0.025'/>
<Setting name='MotherlodeHeight' avg='32' range='16'/>
<Replaces block='hellrock'/>
</Veins>
<Veins block='915:4' inherits='PresetLayeredVeins'>
<Setting name='MotherlodeFrequency' avg='0.025'/>
<Setting name='MotherlodeHeight' avg='32' range='16'/>
<Replaces block='hellrock'/>
</Veins>
<Veins block='915:5' inherits='PresetLayeredVeins'>
<Setting name='MotherlodeFrequency' avg='0.025'/>
<Setting name='MotherlodeHeight' avg='32' range='16'/>
<Replaces block='hellrock'/>
</Veins>
<Veins block='915:6' inherits='PresetLayeredVeins'>
<Setting name='MotherlodeFrequency' avg='0.025'/>
<Setting name='MotherlodeHeight' avg='32' range='16'/>
<Replaces block='hellrock'/>
</Veins>
<Veins block='915:7' inherits='PresetLayeredVeins'>
<Setting name='MotherlodeFrequency' avg='0.025'/>
<Setting name='MotherlodeHeight' avg='32' range='16'/>
<Replaces block='hellrock'/>
</Veins>
<Veins block='915:8' inherits='PresetLayeredVeins'>
<Setting name='MotherlodeFrequency' avg='0.025'/>
<Setting name='MotherlodeHeight' avg='32' range='16'/>
<Replaces block='hellrock'/>
</Veins>
<Veins block='915:9' inherits='PresetLayeredVeins'>
<Setting name='MotherlodeFrequency' avg='0.025'/>
<Setting name='MotherlodeHeight' avg='32' range='16'/>
<Replaces block='hellrock'/>
</Veins>
<Veins block='924:0' inherits='PresetLayeredVeins'>
<Setting name='MotherlodeFrequency' avg='0.025'/>
<Setting name='MotherlodeHeight' avg='32' range='16'/>
<Replaces block='121'/>
</Veins>
<Veins block='924:1' inherits='PresetLayeredVeins'>
<Setting name='MotherlodeFrequency' avg='0.025'/>
<Setting name='MotherlodeHeight' avg='32' range='16'/>
<Replaces block='121'/>
</Veins>
0
What information do you need? I have tested this on many different machines, the problem persists. The problem only exists when I have added new ores to the COG config otherwise everything is normal.
0
0
Alpha 4 fixed the problem and thanks for the Metallurgy support!
Ok, I asked about this before or at least mentioned it, but I checked back through the thread and can't find my post or your response so I'm just going to ask again.
Is there an easier way to disable a specific view (specifically underground)? I have been commenting out everything that has "Cave" in it. This was working before alpha4, but now the server overwrites my comments with a new file and continues displaying Cave mapping.
0
Yes, I cannot do any dynmap commands. it says permission denied as you can see.. I am opped.
0
clean install of alpha 3
https://lh4.googleusercontent.com/-iKlzIrhG4po/UKGLz0xvCEI/AAAAAAAAB3I/V22o8WYwka4/s1280/nogo.png
log
http://pastebin.com/swuK3WyT
0
So I set all ore counts to 0 and vein counts to 0 and all spawnable ore to false. Yet metallurgy still spawns all the ore in the world.. wtf?
0
ummm.. what? lol... you want me to do what with the what in the where with the what now? I mentioned nothing about mystcraft.
0
0
I'm using 6.0.1.350 which is the recommended version of forge. Yes, my user is opped in the ops.txt
0
With the new update fps has improved slightly. Now the lowest it goes is 5, but it hangs around 12 mostly.
0
Default ores without wireframes and debugging mode = normal
Default ores with wireframes and debugging mode = normal
I disabled Metallurgy ore generation (or at least set it all to 0 so no ore is placed in the world) and then removed all the substitutes for Metallurgy which is a huge chunk of it.
My ores without wireframes and debugging mode = 8 FPS
My ores with wireframes and debugging mode = 3 FPS
My machine specs:
AMD FX-8350 4Ghz
32G G.Skill 1600Mhz
EVGA GTX 690
2x Raid0 Cheeta Hybrid 750G for main drive
I've had 3 other people test it with different specs and everyone is having the same problem. Any time my config is used the FPS is horrible.
0
server log: http://pastebin.com/tL7cB8GB