Hi i have another problem i dont take fall damage i try de opping me but nothing i desable god mode and i dont receive fall damage.
Can someone help me?
As always, you should post a permissions file.
Also if you have Essentials and Worldguard these both conflict if you use god mode in the first place
Perm node under the admin group was improperly formatted. Also, I highly suggest you read the OP so you can learn how to do these yourself in the future. http://pastie.org/pastes/4553212/text
So i have my permission file for my server.
the default rank works. and all prefixes work
BUT the permission nodes dont for my server after the default rank. http://pastebin.com/beBvi6y6
that is my pex file
so it is reading the rank giving them the prefix and the default perms. BUT not the new perms they earned for that rank.
i'm going 1 class at a time and i tested this one and found that i couldn't break blocks! i also couldn't take damage from mobs
the prefixes and colors are working just fine, and all the extra stuff is stuff from tekkit that i didn't want people to make.
does anyone know what's wrong?
thx,
Wuble
nvm... i found out that the version of tekkit i was using was 1.2.5 and i was using a 1.3.1 version of essentials so it messed up a little.
Hello I'm using bpermissions, and all the permissions seem to be working fine with the exception of the Moderator group. I have looked it over, and I cannot find any errors. Here is the link for my permissions, and I would appreciate any help on this matter. http://pastie.org/4568607
Additionally, my general group had access to several Command Bin commands (/lockdown, /spy, /xp <player>, and a few others). As you can see, a few of them were pretty major, and we actually had a general use lockdown the server. Caused quite a ruckus. I had to remove these commands completely because I could not figure out why my users had access to these commands. My question is, is this the fault of my permissions, and if so, how, or is this simply just a compatability error with Command Bin? Similarly, my users had access to the /mcability command for MCMMO. Again, is this an error in my permissions, or not?
One final thing. I've been wanting to edit the help.yml for Bukkit. As much as I've tried to understand the directions written on the wiki
I cannot seem to get anything to work other than ignoring all the plugins. I'd really just like to show my users what they can access, allowing them to see all the help pages from all the plugins is what led to a player trying the /lockdown command in the first place. I was hoping to get some help with this as well. Perhaps someone has a nice base for me to work with?
I apologize for all the questions. I am still fairly new at all this, but I have learned a lot since I've started my server. Solving the issues I've listed above would pretty much get my server running perfectly, and I have tried to get answers from so many places already that I was nearly at my wits end until I stumbled upon this awesome sticky. I really hope I can get the answers I need here. Everyone seems super knowledgeable, friendly, and helpful, so thank you in advance.
I really need help to configure PermissionsEX plugin.
Even though I've assigned the "admin" group to myself (leelood) when I join the server it doesn't let me do anything.. it shows as if I was in the "default" group instead.
I really need help to configure PermissionsEX plugin.
Even though I've assigned the "admin" group to myself (leelood) when I join the server it doesn't let me do anything.. it shows as if I was in the "default" group instead.
Your issue is that your YAML text is not lined up correctly. YAML is written in a 2-space hierarchy, in a sense.
So, your "Users:" cannot be aligned with "leelood:". This is because it's registering leelood as a category, which is going to get you nowhere. So, since it's not registering you in a valid group it's going to keep you in the default group. You've also done the same thing with your group's hierarchy. Anyway, I've fixed up your YAML
Your issue is that your YAML text is not lined up correctly. YAML is written in a 2-space hierarchy, in a sense.
So, your "Users:" cannot be aligned with "leelood:". This is because it's registering leelood as a category, which is going to get you nowhere. So, since it's not registering you in a valid group it's going to keep you in the default group. You've also done the same thing with your group's hierarchy. Anyway, I've fixed up your YAML
P.S. I recommend using the /pex user <user> group set <group> command to add users to different groups.
Hello. thanks for the quick reply.
I just downloaded the .yaml file you uploaded in paste bin and replaced the one on the server and still doesn't work.
The same thing is still happening, I don't understand why. Everything seems to be okay.
What else could be wrong?
So i have my permission file for my server.
the default rank works. and all prefixes work
BUT the permission nodes dont for my server after the default rank. http://pastebin.com/beBvi6y6
that is my pex file
so it is reading the rank giving them the prefix and the default perms. BUT not the new perms they earned for that rank.
Is it every group before it or only the default one? Can you see if you have any errors in the console?
i'm going 1 class at a time and i tested this one and found that i couldn't break blocks! i also couldn't take damage from mobs
the prefixes and colors are working just fine, and all the extra stuff is stuff from tekkit that i didn't want people to make.
does anyone know what's wrong?
thx,
Wuble
nvm... i found out that the version of tekkit i was using was 1.2.5 and i was using a 1.3.1 version of essentials so it messed up a little.
Also note that modifyworld uses parenthesis () and not brackets <> . Also that denied nodes should come first.
Look over your wildcard nodes and compare them to CommandBook's FAQ to make sure you're not assigning more than you bargained for. As for the other questions (paragraph 3 + 4), might do best with an individual thread there
Hello. thanks for the quick reply.
I just downloaded the .yaml file you uploaded in paste bin and replaced the one on the server and still doesn't work.
The same thing is still happening, I don't understand why. Everything seems to be okay.
What else could be wrong?
Would you mind posting your most recent copy of your permissions.yml, as well as address any console errors you may or may not be receiving?
Look over your wildcard nodes and compare them to CommandBook's FAQ to make sure you're not assigning more than you bargained for. As for the other questions (paragraph 3 + 4), might do best with an individual thread there
Fair enough about the help.yml. I can start a separate thread about that; however, my real issue remains a mystery. Why aren't the permissions for my moderator group working? As far as command bin goes, I can find no explanation for why certain commands were accessible. As I've said, I've attempted to find the answer on the plugin page, other forums, and so on, but I still can't find an explanation. I try to solve any problems I have through research first, and unless I have missed something, nothing seems to be out of place. So, do you know what's wrong?
As always, you should post a permissions file.
Also if you have Essentials and Worldguard these both conflict if you use god mode in the first place
I dont have worldguard plugin, i put the link of a pastie of my group manager config?
Yes, specifically the groups.yml
Perm node under the admin group was improperly formatted. Also, I highly suggest you read the OP so you can learn how to do these yourself in the future. http://pastie.org/pastes/4553212/text
the default rank works. and all prefixes work
BUT the permission nodes dont for my server after the default rank.
http://pastebin.com/beBvi6y6
that is my pex file
so it is reading the rank giving them the prefix and the default perms. BUT not the new perms they earned for that rank.
http://pastie.org/4564067
i'm going 1 class at a time and i tested this one and found that i couldn't break blocks! i also couldn't take damage from mobs
the prefixes and colors are working just fine, and all the extra stuff is stuff from tekkit that i didn't want people to make.
does anyone know what's wrong?
thx,
Wuble
nvm... i found out that the version of tekkit i was using was 1.2.5 and i was using a 1.3.1 version of essentials so it messed up a little.
Additionally, my general group had access to several Command Bin commands (/lockdown, /spy, /xp <player>, and a few others). As you can see, a few of them were pretty major, and we actually had a general use lockdown the server. Caused quite a ruckus. I had to remove these commands completely because I could not figure out why my users had access to these commands. My question is, is this the fault of my permissions, and if so, how, or is this simply just a compatability error with Command Bin? Similarly, my users had access to the /mcability command for MCMMO. Again, is this an error in my permissions, or not?
One final thing. I've been wanting to edit the help.yml for Bukkit. As much as I've tried to understand the directions written on the wiki
I cannot seem to get anything to work other than ignoring all the plugins. I'd really just like to show my users what they can access, allowing them to see all the help pages from all the plugins is what led to a player trying the /lockdown command in the first place. I was hoping to get some help with this as well. Perhaps someone has a nice base for me to work with?
I apologize for all the questions. I am still fairly new at all this, but I have learned a lot since I've started my server. Solving the issues I've listed above would pretty much get my server running perfectly, and I have tried to get answers from so many places already that I was nearly at my wits end until I stumbled upon this awesome sticky. I really hope I can get the answers I need here. Everyone seems super knowledgeable, friendly, and helpful, so thank you in advance.
Even though I've assigned the "admin" group to myself (leelood) when I join the server it doesn't let me do anything.. it shows as if I was in the "default" group instead.
Here's a screenshot of what I mean:
here's my permissions.yml config file:
Hello leelood,
Your issue is that your YAML text is not lined up correctly. YAML is written in a 2-space hierarchy, in a sense.
So, your "Users:" cannot be aligned with "leelood:". This is because it's registering leelood as a category, which is going to get you nowhere. So, since it's not registering you in a valid group it's going to keep you in the default group. You've also done the same thing with your group's hierarchy. Anyway, I've fixed up your YAML
http://pastebin.com/jwbLtqQb
P.S. I recommend using the /pex user <user> group set <group> command to add users to different groups.
Hello. thanks for the quick reply.
I just downloaded the .yaml file you uploaded in paste bin and replaced the one on the server and still doesn't work.
The same thing is still happening, I don't understand why. Everything seems to be okay.
What else could be wrong?
Is it every group before it or only the default one? Can you see if you have any errors in the console?
Also note that modifyworld uses parenthesis () and not brackets <> . Also that denied nodes should come first.
Look over your wildcard nodes and compare them to CommandBook's FAQ to make sure you're not assigning more than you bargained for. As for the other questions (paragraph 3 + 4), might do best with an individual thread there
Would you mind posting your most recent copy of your permissions.yml, as well as address any console errors you may or may not be receiving?
Fair enough about the help.yml. I can start a separate thread about that; however, my real issue remains a mystery. Why aren't the permissions for my moderator group working? As far as command bin goes, I can find no explanation for why certain commands were accessible. As I've said, I've attempted to find the answer on the plugin page, other forums, and so on, but I still can't find an explanation. I try to solve any problems I have through research first, and unless I have missed something, nothing seems to be out of place. So, do you know what's wrong?
Sure.
Here´s my permissions.yml:
The spaces may look off, but the notepad++ file has them all right, I just copied the one you sent me and pasted it.
here's the console when starting the server:
guest:
default: true
prefix: '&e[Player]'
permissions:
- essentials.afk
- essentials.clearinventory
- essentials.compass
- essentials.depth
- essentials.getpos
- essentials.help
- essentials.list
- essentials.motd
- essentials.rules
- essentials.spawn
- essentials.suicide
- essentials.warp
- essentials.warp.spawn
- essentials.warp.list
- essentials.home
- essentials.sethome
- essentials.balance
- essentials.money
options:
rank: '100'
apprentice:
prefix: '&1[Mod]'
permissions:
- essentials.afk
- essentials.back
- essentials.back.ondeath
- essentials.clearinventory
- essentials.compass
- essentials.depth
- essentials.getpos
- essentials.help
- essentials.home
- essentials.list
- essentials.motd
- essentials.rules
- essentials.sethome
- essentials.home
- essentials.spawn
- essentials.suicide
- essentials.top
- essentials.tp
- essentials.warp
- essentials.warp.spawn
- essentials.warp.list
- modifyworld.*
inheritance:
- survival
options:
rank: '70'
builder:
prefix: '&1[Mod]'
permissions:
- essentials.afk
- essentials.back
- essentials.back.ondeath
- essentials.clearinventory
- essentials.compass
- essentials.depth
- essentials.gamemode
- essentials.getpos
- essentials.heal
- essentials.help
- essentials.home
- essentials.item
- essentials.itemspawn.item-all
- essentials.jump
- essentials.kit
- essentials.kit.*
- essentials.jump
- essentials.list
- essentials.motd
- essentials.rules
- essentials.sethome
- essentials.sethome.multiple
- essentials.setwarp
- essentials.spawn
- essentials.suicide
- essentials.top
- essentials.tp
- essentials.warp
- essentials.warp.*
- essentials.warp.list
- essentials.kick
inheritance:
- apprentice
options:
rank: '65'
pro:
prefix: '&4[Admin]'
permissions:
- BetterShop.*
- essentials.*
- modifyworld.*
- multiverse.*
- permissions.*
- orbEnhance.*
- worldedit.*
- worldguard.*
inheritance:
- builder
options:
rank: '60'
owner:
prefix: '&6[Owner]'
permissions:
- BetterShop.*
- essentials.*
- modifyworld.*
- multiverse.*
- permissions.*
- orbEnhance.*
- worldguard.*
inheritance:
- pro
options:
rank: '50'
users:
spyke22:
group:
- owner
andoleboy316:
group:
- survival
NinjagoClara:
group:
- survival
NinjagoVictor:
group:
- survival
cdschoy1:
group:
- survival
DragonLord275:
group:
- guest
lagarto26:
group:
- builder
please upload your file to http://pastie.org/ or use the code tag
Your problem is that the "Survival" group doesn't exist and your indentation wasn't correct
Try this: http://pastie.org/4575334