Okay, I've just recently switched to bukkit. I have a bunch of plugins installed (Which I basically extracted the .zip file into the plugins folder.).
When I start the server, it tells me I do not have enough RAM. I have a powerful computer with lots of RAM. Anyway to fix this? Also, my Bigbrother plugin says it can not connect with the sql file and then disables itself.
I'll list my plugins. I pretty much need help with all of them.
iStick
NetherGate
Permissions
iConomy
TidyUpInventory
Worldedit
Worldguard
iChat
Bigbrother
BukkittoDate
If there are any that you think I should just read up on, tell me. If there are any complicated to handle ones (I think Nethergate is tough to understand) please dumb it down for me. I know this is asking for a lot and I should just read their instructions but even those confuse me.)
Thanks
Your best bet is to re-configure your permissions nodes.You may have out in an error somewhere.As for BigBrother,You have to make sure your using the SQLite way.To enable this enter it's Config file and choose SQLite.I You use MYsql than put it to that.
# Supports "Default" and "GroupUsers"
plugin:
permissions:
system: default
##
# Groups can contain inheritance.
# To make a group inherit the permissions from another
# group simply place the groups name in the "inheritance:"
# field seperated by commas.
#
# Example: inheritance: Default,Admins,
##
# All permissions including the asterisks must be placed in single quotes.
# like so:
#
# - 'general.spawn'
#
# Otherwise errors will happen!
##
# Globalized Permission settings:
#
# If a permission contains periods (.) you can denote a globalized parameter:
#
# - 'general.*'
#
# This will allow you to use all general commands.
#
##
#
# Single Asterisk denotes all commands:
#
# - '*'
##
groups:
Default:
default: true
info:
prefix:
suffix:
build: true
inheritance:
permissions:
- 'general.spawn'
- 'iConomy.payment'
- 'iConomy.access'
- 'iConomy.rank'
- 'iConomy.list'
- 'iConomy.withdraw'
- 'iConomy.deposit'
- 'iConomy.reset'
Moderator:
default: false
info:
prefix:
suffix:
build: true
inheritance:
- Default
permissions:
- 'general.time'
- 'general.teleport'
- 'general.teleport.here'
- 'general.player-info'
Admins:
default: false
info:
prefix: [Admin]
suffix:
build: true
inheritance:
- Moderator
permissions:
- '*'
Owner:
default: false
Info:
prefix: [Host]
suffix:
build: true
inheritance:
- Moderator
permissions:
- '*'
##
# DarkGrave has control over all commands.
# sk89q can use /spawn & /time
##
users:
(x):
group: Admins
permissions:
(x):
group: Default
permissions:
- 'general.time'
(x):
group: Owner
Permissions:
(x):
group: Admins
permissions:
(x):
group: Admins
permissions:
(x):
group: Admins
permissions:
The (x)'s are for the privacy of my users. Anything wrong? I use notepad++.
Yeah so my conf is empty and I need iconomy to work. Also, when I type /help, it gives me a huge list I can not get through because it is larger than my chatlog. Any plugin for this?
And if I use the SQL version, won't I have to switch a lot of my plugins to use SQL?
I think I'm using the latest build. To get the latest, you go the the bamboo website and grab the latest build and then its in the artifact tab, right?
BigBrother should have generated a default config file. Here's mine for reference (/plugins/BigBrother/BigBrother.properties):
mysqlPass = root #Password for MySQL db (if applicable)
MySQL = false #If true, uses MySQL. If false, uses Sqlite
mysqlUser = root #Username for MySQL db (if applicable)
stickItem = 280 #The item used for /bb stick
mysqlDB = jdbc:mysql://localhost:3306/minecraft #DB for MySQL (if applicable)
engine = INNODB #Engine for the Database (INNODB is recommended)
autoWatch = true #Automatically start watching players
freedMem = 366095.0732192993 #The amount of memory freed by BB
sendDelay = 4 #Delay to batch send updates to database (4-5 recommended)
defaultSearchRadius = 2 #Default search radius for bbhere and bbfind
restoreFire = false #Restore fire when rolling back
flatFileLogs = false #If true, will also log actions to .logs (one for each player)
Regarding the memory issue you need to post more details such as operating system, 32 or 64-bit Java, define how much "lots of RAM" is, and your startup script for craftbukkit.
BigBrother should have generated a default config file. Here's mine for reference (/plugins/BigBrother/BigBrother.properties):
mysqlPass = root #Password for MySQL db (if applicable)
MySQL = false #If true, uses MySQL. If false, uses Sqlite
mysqlUser = root #Username for MySQL db (if applicable)
stickItem = 280 #The item used for /bb stick
mysqlDB = jdbc:mysql://localhost:3306/minecraft #DB for MySQL (if applicable)
engine = INNODB #Engine for the Database (INNODB is recommended)
autoWatch = true #Automatically start watching players
freedMem = 366095.0732192993 #The amount of memory freed by BB
sendDelay = 4 #Delay to batch send updates to database (4-5 recommended)
defaultSearchRadius = 2 #Default search radius for bbhere and bbfind
restoreFire = false #Restore fire when rolling back
flatFileLogs = false #If true, will also log actions to .logs (one for each player)
I did not create one of these for me. I'll try reinstalling it. Actually, I gotta reinstall a lot of stuff, probably.
Quote from ntldr »
Regarding the memory issue you need to post more details such as operating system, 32 or 64-bit Java, define how much "lots of RAM" is, and your startup script for craftbukkit.
"Latest build" doesn't tell me much, there's a new build every few hours during this development stage.
Sprry. I probably don't understand the builds and suc. I do know that I must go to the bamboo thing. How can I update my wrapper? Do I download the artifact? I choose from the one at the top of the list, though, right? After I do have a plugin called Bukkittodate but I do not use it very often.
EDIT: So I guess what I have to do is choose the latest one and download the Craftbukkit JAR and replace the one I had before, right? I don't do anything with the build logs, right? after i save it in my bin, I rename it to craftbukkit so it would not be named craftbukkit 0.01 SNAPSHOT (or something like that), right? So I guess I should update to the most recent one.
To find your version, go down to about the 4th line, and it will start with "This server is runnning Craftbukkit..." and end with "-b###" with the ### being your version. Example, mine ends in -b325, so I am running version 325.
As for permissions and iconomy, did you make sure you have the latest version of those from the website? I was receiving the player_event error as well with permissions and General until I updated them.
And, as for the ram, right-click on the server launcher (the bat file), click EDIT, and paste here what it says please. I think I know your problem, but pasting that info will give me almost a definite answer.
We're still waiting for you to post your craftbukkit version. We believe you when you say that you downloaded the latest version, but without knowing what that is, it's going to be impossible to comment on what works or doesn't work with specific plugins. Most server operators aren't running the latest, they use slightly older versions that have broader compatibility.
Why would you want to do that? It'd very likely cause all of your plugins to stop working or act up....
It's best to wait until a new release is confirmed working or your plugins are updated to work specifically with the newest update out and then upgrade everything.
The exact reason your server is saying there is not enough RAM is because you are starting your server with 512mb instead of the suggested 1024mb (1gb). If you launch it with less than 1gb, it will simply say that there is not enough RAM and suggest you allow it more. I have many 512mb servers and they run just fine, even with bukkit (in most cases).
When I start the server, it tells me I do not have enough RAM. I have a powerful computer with lots of RAM. Anyway to fix this? Also, my Bigbrother plugin says it can not connect with the sql file and then disables itself.
I'll list my plugins. I pretty much need help with all of them.
iStick
NetherGate
Permissions
iConomy
TidyUpInventory
Worldedit
Worldguard
iChat
Bigbrother
BukkittoDate
If there are any that you think I should just read up on, tell me. If there are any complicated to handle ones (I think Nethergate is tough to understand) please dumb it down for me. I know this is asking for a lot and I should just read their instructions but even those confuse me.)
Thanks
My Clan:
[simg]http://i.imgur.com/h1Atq.gif[/simg]
My stories:(1)
[simg]http://i1081.photobucket.com/albums/j357/Nguyeninja/6kftusig.jpg?t=1295835928[/simg]
Hope This Helps!
I'll see what I'm doing wrong with the permissions, though.
My Clan:
[simg]http://i.imgur.com/h1Atq.gif[/simg]
My stories:(1)
[simg]http://i1081.photobucket.com/albums/j357/Nguyeninja/6kftusig.jpg?t=1295835928[/simg]
The (x)'s are for the privacy of my users. Anything wrong? I use notepad++.
My Clan:
[simg]http://i.imgur.com/h1Atq.gif[/simg]
My stories:(1)
[simg]http://i1081.photobucket.com/albums/j357/Nguyeninja/6kftusig.jpg?t=1295835928[/simg]
And if I use the SQL version, won't I have to switch a lot of my plugins to use SQL?
My Clan:
[simg]http://i.imgur.com/h1Atq.gif[/simg]
My stories:(1)
[simg]http://i1081.photobucket.com/albums/j357/Nguyeninja/6kftusig.jpg?t=1295835928[/simg]
I think I'm using the latest build. To get the latest, you go the the bamboo website and grab the latest build and then its in the artifact tab, right?
My Clan:
[simg]http://i.imgur.com/h1Atq.gif[/simg]
My stories:(1)
[simg]http://i1081.photobucket.com/albums/j357/Nguyeninja/6kftusig.jpg?t=1295835928[/simg]
I did not create one of these for me. I'll try reinstalling it. Actually, I gotta reinstall a lot of stuff, probably.
32-bit operating system. Intel Quad Core. Q6600 @2.40GHz 2.39 GHz
Sprry. I probably don't understand the builds and suc. I do know that I must go to the bamboo thing. How can I update my wrapper? Do I download the artifact? I choose from the one at the top of the list, though, right? After I do have a plugin called Bukkittodate but I do not use it very often.
EDIT: So I guess what I have to do is choose the latest one and download the Craftbukkit JAR and replace the one I had before, right? I don't do anything with the build logs, right? after i save it in my bin, I rename it to craftbukkit so it would not be named craftbukkit 0.01 SNAPSHOT (or something like that), right? So I guess I should update to the most recent one.
My Clan:
[simg]http://i.imgur.com/h1Atq.gif[/simg]
My stories:(1)
[simg]http://i1081.photobucket.com/albums/j357/Nguyeninja/6kftusig.jpg?t=1295835928[/simg]
Yeah. I am a noob when it comes to bukkit and very much leaning on the forums and you guys for support.
My Clan:
[simg]http://i.imgur.com/h1Atq.gif[/simg]
My stories:(1)
[simg]http://i1081.photobucket.com/albums/j357/Nguyeninja/6kftusig.jpg?t=1295835928[/simg]
As for permissions and iconomy, did you make sure you have the latest version of those from the website? I was receiving the player_event error as well with permissions and General until I updated them.
And, as for the ram, right-click on the server launcher (the bat file), click EDIT, and paste here what it says please. I think I know your problem, but pasting that info will give me almost a definite answer.
My Clan:
[simg]http://i.imgur.com/h1Atq.gif[/simg]
My stories:(1)
[simg]http://i1081.photobucket.com/albums/j357/Nguyeninja/6kftusig.jpg?t=1295835928[/simg]
/Bump.
[INFO] Xuanz: Bumping Thread.
My Clan:
[simg]http://i.imgur.com/h1Atq.gif[/simg]
My stories:(1)
[simg]http://i1081.photobucket.com/albums/j357/Nguyeninja/6kftusig.jpg?t=1295835928[/simg]
We're still waiting for you to post your craftbukkit version. We believe you when you say that you downloaded the latest version, but without knowing what that is, it's going to be impossible to comment on what works or doesn't work with specific plugins. Most server operators aren't running the latest, they use slightly older versions that have broader compatibility.
My Clan:
[simg]http://i.imgur.com/h1Atq.gif[/simg]
My stories:(1)
[simg]http://i1081.photobucket.com/albums/j357/Nguyeninja/6kftusig.jpg?t=1295835928[/simg]
How can i force my server to update automatically?
My Clan:
[simg]http://i.imgur.com/h1Atq.gif[/simg]
My stories:(1)
[simg]http://i1081.photobucket.com/albums/j357/Nguyeninja/6kftusig.jpg?t=1295835928[/simg]
It's best to wait until a new release is confirmed working or your plugins are updated to work specifically with the newest update out and then upgrade everything.
w: minecraft.cm | e: [email protected] | t: @minecraft_cm | reviews
EDIT-- Nevermind. I just edited the RUN.bat and allowed it to use 1024.
My Clan:
[simg]http://i.imgur.com/h1Atq.gif[/simg]
My stories:(1)
[simg]http://i1081.photobucket.com/albums/j357/Nguyeninja/6kftusig.jpg?t=1295835928[/simg]