Hm.. strange. and to check your version, Open internet explorer (Doesn't work on firefox or opera), and enter
javascript:alert(navigator.userAgent)
Into the address bar.
A box will pop up, and you wil see a few that say...
"Net CLR [Version Number]"
The largest version number is the version you have installed.
I'll make a special build without the part thats causing the error. I also plan to make an update to the jail system soon, that allows as many blocks to be set for the jail as you want.
Uploaded the latest source to the SVN... Though this whole SVN thing is annoying as hell, and TortiseSVN is a pain. now, when i only have 2 revisions out, I have 7 revisions..... Anyone got a better SVN Client that can edit the revision numbers and such? and delete entire revisions?
... Edited !Follow -- Makes the bot follow the person who initiated the command around until they type !Follow again, rather than just whoever's number is in the box....
I can't get this to work, it just says: worldofgoo: !follow
and im like: wtf? :ohmy.gif:
PLZ HELP. Could i be doing something wrong?
Quote from umby24 »
now if you see your location in the WoM Client or elsewhere, you can use the change location command with the location that you have entered, and it will go to that location (Note for WoM Client users, the XYZ pos shown at the title bar of the client, are in the order of X Z Y, Keep this in mind when changing location)
Also add to that: You have to subtract 1 from the y in the enter box to get the block below you, standing on it.
Sorry, but also can use VB minebot on OTHER servers, like besides your own? I've tried entering the ip address i get from the cmd window from the WOM client in the ip window in the minebot. It doesn't connect or say anything though...
yeah.. i would, but theres a few issues, one this was primarly tested on minerCPP, the location changes used on minercpp, and other servers are different, i could make it work for all -- If i were actually able to pick the changes up, which i have tried to do in mynecraft, and couldn't do.
Second issue, is I have no clue how to takes ones username and password, pass it through the minecraft website, and then keep it so that you can pass the verify-names check. which there is no documentation on...
It doesn't say anything due to this issue.
As for !follow, did you make sure to add yourself to the admin list?
and is your name in the user list on the right?
if either of these 2 is false, then its not going to work.
See the end of this message for details on invoking
just-in-time (JIT) debugging instead of this dialog box.
************** Exception Text **************
System.ArgumentOutOfRangeException: Length cannot be less than zero.
Parameter name: length
at System.String.InternalSubStringWithChecks(Int32 startIndex, Int32 length, Boolean fAlwaysCopy)
at Minebot.Form1.Form1_Load(Object sender, EventArgs e)
at System.EventHandler.Invoke(Object sender, EventArgs e)
at System.Windows.Forms.Form.OnLoad(EventArgs e)
at System.Windows.Forms.Form.OnCreateControl()
at System.Windows.Forms.Control.CreateControl(Boolean fIgnoreVisible)
at System.Windows.Forms.Control.CreateControl()
at System.Windows.Forms.Control.WmShowWindow(Message& m)
at System.Windows.Forms.Control.WndProc(Message& m)
at System.Windows.Forms.ScrollableControl.WndProc(Message& m)
at System.Windows.Forms.ContainerControl.WndProc(Message& m)
at System.Windows.Forms.Form.WmShowWindow(Message& m)
at System.Windows.Forms.Form.WndProc(Message& m)
at System.Windows.Forms.Control.ControlNativeWindow.OnMessage(Message& m)
at System.Windows.Forms.Control.ControlNativeWindow.WndProc(Message& m)
at System.Windows.Forms.NativeWindow.Callback(IntPtr hWnd, Int32 msg, IntPtr wparam, IntPtr lparam)
************** Loaded Assemblies **************
mscorlib
Assembly Version: 2.0.0.0
Win32 Version: 2.0.50727.4927 (NetFXspW7.050727-4900)
CodeBase: file:///C:/Windows/Microsoft.NET/Framework/v2.0.50727/mscorlib.dll
----------------------------------------
Minebot
Assembly Version: 1.0.0.0
Win32 Version: 1.0.0.0
CodeBase: file:///C:/Users/Sinister/Desktop/Minebot/Minebot.exe
----------------------------------------
Microsoft.VisualBasic
Assembly Version: 8.0.0.0
Win32 Version: 8.0.50727.4927 (NetFXspW7.050727-4900)
CodeBase: file:///C:/Windows/assembly/GAC_MSIL/Microsoft.VisualBasic/8.0.0.0__b03f5f7f11d50a3a/Microsoft.VisualBasic.dll
----------------------------------------
System
Assembly Version: 2.0.0.0
Win32 Version: 2.0.50727.4927 (NetFXspW7.050727-4900)
CodeBase: file:///C:/Windows/assembly/GAC_MSIL/System/2.0.0.0__b77a5c561934e089/System.dll
----------------------------------------
System.Windows.Forms
Assembly Version: 2.0.0.0
Win32 Version: 2.0.50727.4927 (NetFXspW7.050727-4900)
CodeBase: file:///C:/Windows/assembly/GAC_MSIL/System.Windows.Forms/2.0.0.0__b77a5c561934e089/System.Windows.Forms.dll
----------------------------------------
System.Drawing
Assembly Version: 2.0.0.0
Win32 Version: 2.0.50727.4927 (NetFXspW7.050727-4900)
CodeBase: file:///C:/Windows/assembly/GAC_MSIL/System.Drawing/2.0.0.0__b03f5f7f11d50a3a/System.Drawing.dll
----------------------------------------
System.Configuration
Assembly Version: 2.0.0.0
Win32 Version: 2.0.50727.4927 (NetFXspW7.050727-4900)
CodeBase: file:///C:/Windows/assembly/GAC_MSIL/System.Configuration/2.0.0.0__b03f5f7f11d50a3a/System.Configuration.dll
----------------------------------------
System.Xml
Assembly Version: 2.0.0.0
Win32 Version: 2.0.50727.4927 (NetFXspW7.050727-4900)
CodeBase: file:///C:/Windows/assembly/GAC_MSIL/System.Xml/2.0.0.0__b77a5c561934e089/System.Xml.dll
----------------------------------------
System.Runtime.Remoting
Assembly Version: 2.0.0.0
Win32 Version: 2.0.50727.4927 (NetFXspW7.050727-4900)
CodeBase: file:///C:/Windows/assembly/GAC_MSIL/System.Runtime.Remoting/2.0.0.0__b77a5c561934e089/System.Runtime.Remoting.dll
----------------------------------------
Winsock Orcas
Assembly Version: 4.0.0.0
Win32 Version: 4.0.0.0
CodeBase: file:///C:/Users/Sinister/Desktop/Minebot/Winsock%20Orcas.DLL
----------------------------------------
************** JIT Debugging **************
To enable just-in-time (JIT) debugging, the .config file for this
application or computer (machine.config) must have the
jitDebugging value set in the system.windows.forms section.
The application must also be compiled with debugging
enabled.
For example:
<configuration>
<system.windows.forms jitDebugging="true" />
</configuration>
When JIT debugging is enabled, any unhandled exception
will be sent to the JIT debugger registered on the computer
rather than be handled by this dialog box.
...As for !follow, did you make sure to add yourself to the admin list?
and is your name in the user list on the right?
if either of these 2 is false, then its not going to work....
Yes i did do this and i did it right because i can PRESS open/close jail in the bot, but not like !openjail or !closejail...and do you do !follow in-game or in the bot? I'm doing it in both and it STILL doesn't work. :sad.gif: plz help.
EDIT: Is there any way to connect to OTHER people's servers besides your own? I've put in their CORRECT IP and port, but it doesn't do/say anything and it doesn't join the server :cry: plz help...
See the end of this message for details on invoking
just-in-time (JIT) debugging instead of this dialog box.
************** Exception Text **************
System.ArgumentOutOfRangeException: Length cannot be less than zero.
Parameter name: length
at System.String.InternalSubStringWithChecks(Int32 startIndex, Int32 length, Boolean fAlwaysCopy)
at Minebot.Form1.Form1_Load(Object sender, EventArgs e)
at System.EventHandler.Invoke(Object sender, EventArgs e)
at System.Windows.Forms.Form.OnLoad(EventArgs e)
at System.Windows.Forms.Form.OnCreateControl()
at System.Windows.Forms.Control.CreateControl(Boolean fIgnoreVisible)
at System.Windows.Forms.Control.CreateControl()
at System.Windows.Forms.Control.WmShowWindow(Message& m)
at System.Windows.Forms.Control.WndProc(Message& m)
at System.Windows.Forms.ScrollableControl.WndProc(Message& m)
at System.Windows.Forms.ContainerControl.WndProc(Message& m)
at System.Windows.Forms.Form.WmShowWindow(Message& m)
at System.Windows.Forms.Form.WndProc(Message& m)
at System.Windows.Forms.Control.ControlNativeWindow.OnMessage(Message& m)
at System.Windows.Forms.Control.ControlNativeWindow.WndProc(Message& m)
at System.Windows.Forms.NativeWindow.Callback(IntPtr hWnd, Int32 msg, IntPtr wparam, IntPtr lparam)
************** Loaded Assemblies **************
mscorlib
Assembly Version: 2.0.0.0
Win32 Version: 2.0.50727.4927 (NetFXspW7.050727-4900)
CodeBase: file:///C:/Windows/Microsoft.NET/Framework/v2.0.50727/mscorlib.dll
----------------------------------------
Minebot
Assembly Version: 1.0.0.0
Win32 Version: 1.0.0.0
CodeBase: file:///C:/Users/Sinister/Desktop/Minebot/Minebot.exe
----------------------------------------
Microsoft.VisualBasic
Assembly Version: 8.0.0.0
Win32 Version: 8.0.50727.4927 (NetFXspW7.050727-4900)
CodeBase: file:///C:/Windows/assembly/GAC_MSIL/Microsoft.VisualBasic/8.0.0.0__b03f5f7f11d50a3a/Microsoft.VisualBasic.dll
----------------------------------------
System
Assembly Version: 2.0.0.0
Win32 Version: 2.0.50727.4927 (NetFXspW7.050727-4900)
CodeBase: file:///C:/Windows/assembly/GAC_MSIL/System/2.0.0.0__b77a5c561934e089/System.dll
----------------------------------------
System.Windows.Forms
Assembly Version: 2.0.0.0
Win32 Version: 2.0.50727.4927 (NetFXspW7.050727-4900)
CodeBase: file:///C:/Windows/assembly/GAC_MSIL/System.Windows.Forms/2.0.0.0__b77a5c561934e089/System.Windows.Forms.dll
----------------------------------------
System.Drawing
Assembly Version: 2.0.0.0
Win32 Version: 2.0.50727.4927 (NetFXspW7.050727-4900)
CodeBase: file:///C:/Windows/assembly/GAC_MSIL/System.Drawing/2.0.0.0__b03f5f7f11d50a3a/System.Drawing.dll
----------------------------------------
System.Configuration
Assembly Version: 2.0.0.0
Win32 Version: 2.0.50727.4927 (NetFXspW7.050727-4900)
CodeBase: file:///C:/Windows/assembly/GAC_MSIL/System.Configuration/2.0.0.0__b03f5f7f11d50a3a/System.Configuration.dll
----------------------------------------
System.Xml
Assembly Version: 2.0.0.0
Win32 Version: 2.0.50727.4927 (NetFXspW7.050727-4900)
CodeBase: file:///C:/Windows/assembly/GAC_MSIL/System.Xml/2.0.0.0__b77a5c561934e089/System.Xml.dll
----------------------------------------
System.Runtime.Remoting
Assembly Version: 2.0.0.0
Win32 Version: 2.0.50727.4927 (NetFXspW7.050727-4900)
CodeBase: file:///C:/Windows/assembly/GAC_MSIL/System.Runtime.Remoting/2.0.0.0__b77a5c561934e089/System.Runtime.Remoting.dll
----------------------------------------
Winsock Orcas
Assembly Version: 4.0.0.0
Win32 Version: 4.0.0.0
CodeBase: file:///C:/Users/Sinister/Desktop/Minebot/Winsock%20Orcas.DLL
----------------------------------------
************** JIT Debugging **************
To enable just-in-time (JIT) debugging, the .config file for this
application or computer (machine.config) must have the
jitDebugging value set in the system.windows.forms section.
The application must also be compiled with debugging
enabled.
For example:
<configuration>
<system.windows.forms jitDebugging="true" />
</configuration>
When JIT debugging is enabled, any unhandled exception
will be sent to the JIT debugger registered on the computer
rather than be handled by this dialog box.
Your admin's list is corrupted, goto start > run then type in regedit.
browse to the key HKEY_CURRENT_USER > SOFTWARE > VB and VBA Program Settings > Minebot
Then delete the admins value, or modify it so that there is a ';' (Semi-Colon) After each name of each admin.
Quote from worldofgoo »
Quote from umby24 »
...As for !follow, did you make sure to add yourself to the admin list?
and is your name in the user list on the right?
if either of these 2 is false, then its not going to work....
Yes i did do this and i did it right because i can PRESS open/close jail in the bot, but not like !openjail or !closejail...and do you do !follow in-game or in the bot? I'm doing it in both and it STILL doesn't work. :sad.gif: plz help.
EDIT: Is there any way to connect to OTHER people's servers besides your own? I've put in their CORRECT IP and port, but it doesn't do/say anything and it doesn't join the server :cry: plz help...
As for joining other servers, read the last post i made reguarding the issue,
As for the bot commands not working, What is your server? I will stop by to help you out with it.
See the end of this message for details on invoking
just-in-time (JIT) debugging instead of this dialog box.
************** Exception Text **************
System.ArgumentOutOfRangeException: Length cannot be less than zero.
Parameter name: length
at System.String.InternalSubStringWithChecks(Int32 startIndex, Int32 length, Boolean fAlwaysCopy)
at Minebot.Form1.Form1_Load(Object sender, EventArgs e)
at System.EventHandler.Invoke(Object sender, EventArgs e)
at System.Windows.Forms.Form.OnLoad(EventArgs e)
at System.Windows.Forms.Form.OnCreateControl()
at System.Windows.Forms.Control.CreateControl(Boolean fIgnoreVisible)
at System.Windows.Forms.Control.CreateControl()
at System.Windows.Forms.Control.WmShowWindow(Message& m)
at System.Windows.Forms.Control.WndProc(Message& m)
at System.Windows.Forms.ScrollableControl.WndProc(Message& m)
at System.Windows.Forms.ContainerControl.WndProc(Message& m)
at System.Windows.Forms.Form.WmShowWindow(Message& m)
at System.Windows.Forms.Form.WndProc(Message& m)
at System.Windows.Forms.Control.ControlNativeWindow.OnMessage(Message& m)
at System.Windows.Forms.Control.ControlNativeWindow.WndProc(Message& m)
at System.Windows.Forms.NativeWindow.Callback(IntPtr hWnd, Int32 msg, IntPtr wparam, IntPtr lparam)
************** Loaded Assemblies **************
mscorlib
Assembly Version: 2.0.0.0
Win32 Version: 2.0.50727.4927 (NetFXspW7.050727-4900)
CodeBase: file:///C:/Windows/Microsoft.NET/Framework/v2.0.50727/mscorlib.dll
----------------------------------------
Minebot
Assembly Version: 1.0.0.0
Win32 Version: 1.0.0.0
CodeBase: file:///C:/Users/Sinister/Desktop/Minebot/Minebot.exe
----------------------------------------
Microsoft.VisualBasic
Assembly Version: 8.0.0.0
Win32 Version: 8.0.50727.4927 (NetFXspW7.050727-4900)
CodeBase: file:///C:/Windows/assembly/GAC_MSIL/Microsoft.VisualBasic/8.0.0.0__b03f5f7f11d50a3a/Microsoft.VisualBasic.dll
----------------------------------------
System
Assembly Version: 2.0.0.0
Win32 Version: 2.0.50727.4927 (NetFXspW7.050727-4900)
CodeBase: file:///C:/Windows/assembly/GAC_MSIL/System/2.0.0.0__b77a5c561934e089/System.dll
----------------------------------------
System.Windows.Forms
Assembly Version: 2.0.0.0
Win32 Version: 2.0.50727.4927 (NetFXspW7.050727-4900)
CodeBase: file:///C:/Windows/assembly/GAC_MSIL/System.Windows.Forms/2.0.0.0__b77a5c561934e089/System.Windows.Forms.dll
----------------------------------------
System.Drawing
Assembly Version: 2.0.0.0
Win32 Version: 2.0.50727.4927 (NetFXspW7.050727-4900)
CodeBase: file:///C:/Windows/assembly/GAC_MSIL/System.Drawing/2.0.0.0__b03f5f7f11d50a3a/System.Drawing.dll
----------------------------------------
System.Configuration
Assembly Version: 2.0.0.0
Win32 Version: 2.0.50727.4927 (NetFXspW7.050727-4900)
CodeBase: file:///C:/Windows/assembly/GAC_MSIL/System.Configuration/2.0.0.0__b03f5f7f11d50a3a/System.Configuration.dll
----------------------------------------
System.Xml
Assembly Version: 2.0.0.0
Win32 Version: 2.0.50727.4927 (NetFXspW7.050727-4900)
CodeBase: file:///C:/Windows/assembly/GAC_MSIL/System.Xml/2.0.0.0__b77a5c561934e089/System.Xml.dll
----------------------------------------
System.Runtime.Remoting
Assembly Version: 2.0.0.0
Win32 Version: 2.0.50727.4927 (NetFXspW7.050727-4900)
CodeBase: file:///C:/Windows/assembly/GAC_MSIL/System.Runtime.Remoting/2.0.0.0__b77a5c561934e089/System.Runtime.Remoting.dll
----------------------------------------
Winsock Orcas
Assembly Version: 4.0.0.0
Win32 Version: 4.0.0.0
CodeBase: file:///C:/Users/Sinister/Desktop/Minebot/Winsock%20Orcas.DLL
----------------------------------------
************** JIT Debugging **************
To enable just-in-time (JIT) debugging, the .config file for this
application or computer (machine.config) must have the
jitDebugging value set in the system.windows.forms section.
The application must also be compiled with debugging
enabled.
For example:
<configuration>
<system.windows.forms jitDebugging="true" />
</configuration>
When JIT debugging is enabled, any unhandled exception
will be sent to the JIT debugger registered on the computer
rather than be handled by this dialog box.
Your admin's list is corrupted, goto start > run then type in regedit.
browse to the key HKEY_CURRENT_USER > SOFTWARE > VB and VBA Program Settings > Minebot
Then delete the admins value, or modify it so that there is a ';' (Semi-Colon) After each name of each admin.
Ok, I may have found the problem, There is no entries for Minebot at all. I added a Minebot key for it, but what type of entry is it supposed to be?
See the end of this message for details on invoking
just-in-time (JIT) debugging instead of this dialog box.
************** Exception Text **************
System.ArgumentOutOfRangeException: Length cannot be less than zero.
Parameter name: length
at System.String.InternalSubStringWithChecks(Int32 startIndex, Int32 length, Boolean fAlwaysCopy)
at Minebot.Form1.Form1_Load(Object sender, EventArgs e)
at System.EventHandler.Invoke(Object sender, EventArgs e)
at System.Windows.Forms.Form.OnLoad(EventArgs e)
at System.Windows.Forms.Form.OnCreateControl()
at System.Windows.Forms.Control.CreateControl(Boolean fIgnoreVisible)
at System.Windows.Forms.Control.CreateControl()
at System.Windows.Forms.Control.WmShowWindow(Message& m)
at System.Windows.Forms.Control.WndProc(Message& m)
at System.Windows.Forms.ScrollableControl.WndProc(Message& m)
at System.Windows.Forms.ContainerControl.WndProc(Message& m)
at System.Windows.Forms.Form.WmShowWindow(Message& m)
at System.Windows.Forms.Form.WndProc(Message& m)
at System.Windows.Forms.Control.ControlNativeWindow.OnMessage(Message& m)
at System.Windows.Forms.Control.ControlNativeWindow.WndProc(Message& m)
at System.Windows.Forms.NativeWindow.Callback(IntPtr hWnd, Int32 msg, IntPtr wparam, IntPtr lparam)
************** Loaded Assemblies **************
mscorlib
Assembly Version: 2.0.0.0
Win32 Version: 2.0.50727.4927 (NetFXspW7.050727-4900)
CodeBase: file:///C:/Windows/Microsoft.NET/Framework/v2.0.50727/mscorlib.dll
----------------------------------------
Minebot
Assembly Version: 1.0.0.0
Win32 Version: 1.0.0.0
CodeBase: file:///C:/Users/Sinister/Desktop/Minebot/Minebot.exe
----------------------------------------
Microsoft.VisualBasic
Assembly Version: 8.0.0.0
Win32 Version: 8.0.50727.4927 (NetFXspW7.050727-4900)
CodeBase: file:///C:/Windows/assembly/GAC_MSIL/Microsoft.VisualBasic/8.0.0.0__b03f5f7f11d50a3a/Microsoft.VisualBasic.dll
----------------------------------------
System
Assembly Version: 2.0.0.0
Win32 Version: 2.0.50727.4927 (NetFXspW7.050727-4900)
CodeBase: file:///C:/Windows/assembly/GAC_MSIL/System/2.0.0.0__b77a5c561934e089/System.dll
----------------------------------------
System.Windows.Forms
Assembly Version: 2.0.0.0
Win32 Version: 2.0.50727.4927 (NetFXspW7.050727-4900)
CodeBase: file:///C:/Windows/assembly/GAC_MSIL/System.Windows.Forms/2.0.0.0__b77a5c561934e089/System.Windows.Forms.dll
----------------------------------------
System.Drawing
Assembly Version: 2.0.0.0
Win32 Version: 2.0.50727.4927 (NetFXspW7.050727-4900)
CodeBase: file:///C:/Windows/assembly/GAC_MSIL/System.Drawing/2.0.0.0__b03f5f7f11d50a3a/System.Drawing.dll
----------------------------------------
System.Configuration
Assembly Version: 2.0.0.0
Win32 Version: 2.0.50727.4927 (NetFXspW7.050727-4900)
CodeBase: file:///C:/Windows/assembly/GAC_MSIL/System.Configuration/2.0.0.0__b03f5f7f11d50a3a/System.Configuration.dll
----------------------------------------
System.Xml
Assembly Version: 2.0.0.0
Win32 Version: 2.0.50727.4927 (NetFXspW7.050727-4900)
CodeBase: file:///C:/Windows/assembly/GAC_MSIL/System.Xml/2.0.0.0__b77a5c561934e089/System.Xml.dll
----------------------------------------
System.Runtime.Remoting
Assembly Version: 2.0.0.0
Win32 Version: 2.0.50727.4927 (NetFXspW7.050727-4900)
CodeBase: file:///C:/Windows/assembly/GAC_MSIL/System.Runtime.Remoting/2.0.0.0__b77a5c561934e089/System.Runtime.Remoting.dll
----------------------------------------
Winsock Orcas
Assembly Version: 4.0.0.0
Win32 Version: 4.0.0.0
CodeBase: file:///C:/Users/Sinister/Desktop/Minebot/Winsock%20Orcas.DLL
----------------------------------------
************** JIT Debugging **************
To enable just-in-time (JIT) debugging, the .config file for this
application or computer (machine.config) must have the
jitDebugging value set in the system.windows.forms section.
The application must also be compiled with debugging
enabled.
For example:
<configuration>
<system.windows.forms jitDebugging="true" />
</configuration>
When JIT debugging is enabled, any unhandled exception
will be sent to the JIT debugger registered on the computer
rather than be handled by this dialog box.
Your admin's list is corrupted, goto start > run then type in regedit.
browse to the key HKEY_CURRENT_USER > SOFTWARE > VB and VBA Program Settings > Minebot
Then delete the admins value, or modify it so that there is a ';' (Semi-Colon) After each name of each admin.
Quote from worldofgoo »
Quote from umby24 »
...As for !follow, did you make sure to add yourself to the admin list?
and is your name in the user list on the right?
if either of these 2 is false, then its not going to work....
Yes i did do this and i did it right because i can PRESS open/close jail in the bot, but not like !openjail or !closejail...and do you do !follow in-game or in the bot? I'm doing it in both and it STILL doesn't work. :sad.gif: plz help.
EDIT: Is there any way to connect to OTHER people's servers besides your own? I've put in their CORRECT IP and port, but it doesn't do/say anything and it doesn't join the server :cry: plz help...
As for joining other servers, read the last post i made reguarding the issue,
As for the bot commands not working, What is your server? I will stop by to help you out with it.
New bugs found:
1. Cannot connect to servers other than local host (127.0.0.1)
New planned features:
1. !players not being cut off
2. !Follow [name] to follow that name
3. !Follow staying a few steps behind the person.
4. GUI colorfy
5. Website
And Finally...
NEW FEATURES IN 1.2:
- Added an alias for !Closejail, !openjail, and !Follow. (!CJ, !OJ, and !F)
- UNLIMITED JAIL BLOCKS.
That's right, Unlimited jail blocks. Refer to the readme for the new instructions, but its pretty straight forward.
So you can now pick as many blocks as you want as your jail.
New bugs found:
1. Cannot connect to servers other than local host (127.0.0.1)
New planned features:
1. !players not being cut off
2. !Follow [name] to follow that name
3. !Follow staying a few steps behind the person.
4. GUI colorfy
5. Website
And Finally...
NEW FEATURES IN 1.2:
- Added an alias for !Closejail, !openjail, and !Follow. (!CJ, !OJ, and !F)
- UNLIMITED JAIL BLOCKS.
That's right, Unlimited jail blocks. Refer to the readme for the new instructions, but its pretty straight forward.
So you can now pick as many blocks as you want as your jail.
Hey Umby, thanks for using my ideas. :biggrin.gif: I hope this works out and will you fix the bug where you can only connect to 127.0.0.1? If so, YAY!!!!!!!!!! :biggrin.gif: :tongue.gif:
Colorfy -- as in I'm going to make the user interface more colorful, to look a bit better.
Alright. it can now log on to ANY server via its play.jsp url.
It will be released as soon as i get a few more things done.
But, now verify-names set to off is no longer required.
Just tested by logging onto D3's server, worked flawlessly.
(I gotta make it log you out if your logged in though, a bit buggy on that side.)
1. I would LOVE to have the colorfy thing. 2. So has the the play.jsp url thing been added yet or does the "It will be released as soon as i get a few more things done" part mean it hasn't? 3. Does the (I gotta make it log you out if your logged in though, a bit buggy on that side.) part mean that if I log on at the same time my bot is on, I will get kicked?
3. Yes and no, Your bot will need a separate account, because i don't know of any servers that allow 2 of the same account to be logged on. what i meant was it uses a build in internet explorer to log in, and if you use internet explorer and are already logged on (or the bot has logged you on) it stays with that account unless you log out of minecraft.net using I.E.
so i'm going to make it log you if you happen to be logged in.
-- I just spent 3 hours working with threading the bot a small amount, and i got the same. exact. result as i do if its not threaded. skips out and doesn't see some of the incoming packets. I'm not sure what the issue is, I'm pretty sure that it may be due to the socket i'm using not picking packets up. But what people have used in C# for their servers (System.Net.Sockets) won't even log the bot on. not sure why. So unless anyone can help theres not going to be much progress in the terms of getting it to receive every single packet.
javascript:alert(navigator.userAgent)
Into the address bar.
A box will pop up, and you wil see a few that say...
"Net CLR [Version Number]"
The largest version number is the version you have installed.
I'll make a special build without the part thats causing the error. I also plan to make an update to the jail system soon, that allows as many blocks to be set for the jail as you want.
D3 Server! [Advanced, Custom physics / Anti-Greif / RP]
Server Status:
And it was the bot itself causing the problem?
It was just a line i drew to keep the boxes for the jail separated and looking neat.
Nothing huge.
so yeah, it was the bot.
EDIT: Updated it, removed the lines so it shouldn't bother you anymore, if it still errors, let me know and I can try one more thing.
Its in the main zip file on sourceforge.
D3 Server! [Advanced, Custom physics / Anti-Greif / RP]
Server Status:
D3 Server! [Advanced, Custom physics / Anti-Greif / RP]
Server Status:
I can't get this to work, it just says: worldofgoo: !follow
and im like: wtf? :ohmy.gif:
PLZ HELP. Could i be doing something wrong?
Also add to that: You have to subtract 1 from the y in the enter box to get the block below you, standing on it.
Sorry, but also can use VB minebot on OTHER servers, like besides your own? I've tried entering the ip address i get from the cmd window from the WOM client in the ip window in the minebot. It doesn't connect or say anything though...
Second issue, is I have no clue how to takes ones username and password, pass it through the minecraft website, and then keep it so that you can pass the verify-names check. which there is no documentation on...
It doesn't say anything due to this issue.
As for !follow, did you make sure to add yourself to the admin list?
and is your name in the user list on the right?
if either of these 2 is false, then its not going to work.
D3 Server! [Advanced, Custom physics / Anti-Greif / RP]
Server Status:
A HarDrive World Hosting Solutions
Yes i did do this and i did it right because i can PRESS open/close jail in the bot, but not like !openjail or !closejail...and do you do !follow in-game or in the bot? I'm doing it in both and it STILL doesn't work. :sad.gif: plz help.
EDIT: Is there any way to connect to OTHER people's servers besides your own? I've put in their CORRECT IP and port, but it doesn't do/say anything and it doesn't join the server :cry: plz help...
Your admin's list is corrupted, goto start > run then type in regedit.
browse to the key HKEY_CURRENT_USER > SOFTWARE > VB and VBA Program Settings > Minebot
Then delete the admins value, or modify it so that there is a ';' (Semi-Colon) After each name of each admin.
As for joining other servers, read the last post i made reguarding the issue,
As for the bot commands not working, What is your server? I will stop by to help you out with it.
D3 Server! [Advanced, Custom physics / Anti-Greif / RP]
Server Status:
Ok, I may have found the problem, There is no entries for Minebot at all. I added a Minebot key for it, but what type of entry is it supposed to be?
A HarDrive World Hosting Solutions
The real key is: HKEY_CURRENT_USER > SOFTWARE > VB and VBA Program Settings > SH > Minebot
D3 Server! [Advanced, Custom physics / Anti-Greif / RP]
Server Status:
My server is called: ! Worldofgoo
New bugs found:
1. Cannot connect to servers other than local host (127.0.0.1)
New planned features:
1. !players not being cut off
2. !Follow [name] to follow that name
3. !Follow staying a few steps behind the person.
4. GUI colorfy
5. Website
And Finally...
NEW FEATURES IN 1.2:
- Added an alias for !Closejail, !openjail, and !Follow. (!CJ, !OJ, and !F)
- UNLIMITED JAIL BLOCKS.
That's right, Unlimited jail blocks. Refer to the readme for the new instructions, but its pretty straight forward.
So you can now pick as many blocks as you want as your jail.
D3 Server! [Advanced, Custom physics / Anti-Greif / RP]
Server Status:
I never got the jail thing to work but hey, i can try again now.
Who am I?
I am the other 5% that is laughing.
Hey Umby, thanks for using my ideas. :biggrin.gif: I hope this works out and will you fix the bug where you can only connect to 127.0.0.1? If so, YAY!!!!!!!!!! :biggrin.gif: :tongue.gif:
Oh, and what is colorfy?
Colorfy -- as in I'm going to make the user interface more colorful, to look a bit better.
Alright. it can now log on to ANY server via its play.jsp url.
It will be released as soon as i get a few more things done.
But, now verify-names set to off is no longer required.
Just tested by logging onto D3's server, worked flawlessly.
(I gotta make it log you out if your logged in though, a bit buggy on that side.)
D3 Server! [Advanced, Custom physics / Anti-Greif / RP]
Server Status:
1. I would LOVE to have the colorfy thing.
2. So has the the play.jsp url thing been added yet or does the "It will be released as soon as i get a few more things done" part mean it hasn't?
3. Does the (I gotta make it log you out if your logged in though, a bit buggy on that side.) part mean that if I log on at the same time my bot is on, I will get kicked?
2. it has been added and well tested.
3. Yes and no, Your bot will need a separate account, because i don't know of any servers that allow 2 of the same account to be logged on. what i meant was it uses a build in internet explorer to log in, and if you use internet explorer and are already logged on (or the bot has logged you on) it stays with that account unless you log out of minecraft.net using I.E.
so i'm going to make it log you if you happen to be logged in.
D3 Server! [Advanced, Custom physics / Anti-Greif / RP]
Server Status:
EDIT: I think i understand what you mean, but what if i use Firefox?
also, newest version uploaded. tell me what you think!
https://sourceforge.net/projects/minebot/
also, havn't seen your server on much lately
-- I just spent 3 hours working with threading the bot a small amount, and i got the same. exact. result as i do if its not threaded. skips out and doesn't see some of the incoming packets. I'm not sure what the issue is, I'm pretty sure that it may be due to the socket i'm using not picking packets up. But what people have used in C# for their servers (System.Net.Sockets) won't even log the bot on. not sure why. So unless anyone can help theres not going to be much progress in the terms of getting it to receive every single packet.
D3 Server! [Advanced, Custom physics / Anti-Greif / RP]
Server Status: