It's EnderIO. Either use a non alpha version (if available), or remove it.
A good way to find out what mod is causing a crash on startup: there is a list of mods about halfway down the log, and it will have several letters before each mod. Remove any mod with an E in that sequence of letters (i.e. UC, UE).
i tried that, its mostly likely to be a mod conflit, not a EnderIO problem, since iver tried the 3#-10# and 14#-17#(latest) builds on EnderIO on the jenkins site (http://ci.tterrag.com/job/EnderIO-1.8/) my guess is either an EnderCore or EnderIO conflict (the modpack works fine without both them, but since it
already had an issue with journeymap and Weather 2, i would guess a conflict but i cannot find it)
Im just trying to load forge 1808, enderIO(multiple versions) and EnderCore(latest), no success, ill try to downgrade the forge version, as thats is probably whats going on. ill reply if i get any sucess on that.
This is from your first paste, all the way from first post:
The fist error was caused mostly by LLibrary, which was installed. Its modifications of the core vanilla Minecraft/Forge code affected EnderIO, thats why EnderIO also showed errors.
If you still crash with a new profile, we'll need a new report/log.
Ive sent new report logs on the last messages, they were made in a new profile , with different forge versions to make sure its not a new Forge problem, and with different ender IO versions
links to the crash reports on the differents forge versions:
Didnt see any changes between them. But im linking all just in case.
I can only see 3 options for this problem, either EnderIO, EnderCore or Forge errors. Since i've tried about 10 different EnderIO alpha builds on their jenkins project, its mostly likely to be either a forge or endercore problem. Weird thing is that the EnderCore loads when alone, without EnderIO, but whats are the odds of 17 different builds have the same crash? At least one of them should be stable (and i double checked that they were 1.8.9, so i dont think its a 1.7.10 mod)
This is from your first paste, all the way from first post:
The fist error was caused mostly by LLibrary, which was installed. Its modifications of the core vanilla Minecraft/Forge code affected EnderIO, thats why EnderIO also showed errors.
I'll need a bit to go through the fresh profile logs.
EDIT:
So far the biggest issue here is that you're grabbing alpha builds straight from the jenkins. Stuff so unstable it doesn't even rate being placed on Curse Forge.
EDIT2:
And a very, very old build at that. EnderCore 3.0.1 is almost 2 months old, most current is 3.0.12.
EnderIO 3.0.0.6 is maybe only 2 weeks old, but still 6 versions behind.
Most likely cause of these new crashes? Version mismatch. EnderCore 3.0.1 won't work with EnderIO 3.0.0.6. Going by build dates you should use EnderCore 3.0.9 at least.
I tried the newest ones, either newest core with newest enderio, no sucess, and then i tried the lastest Core with 10 Different EnderIO builds. No sucess.
Got it to work, it was due the EnderCore being too old. I did not find the new one because the newest one they have on Curse servers is the 2 months old.
When using the Newest EnderCore and EnderIO , they work just fine.
Using Curse, evrything else should be listed on the Crash report.Using and Alpha EnderIO build, but it is stable.Help pls.
Crash report here http://pastebin.com/DTZqfeGC
It's EnderIO. Either use a non alpha version (if available), or remove it.
A good way to find out what mod is causing a crash on startup: there is a list of mods about halfway down the log, and it will have several letters before each mod. Remove any mod with an E in that sequence of letters (i.e. UC,
UE).1| if (signature = true) {
2| document.write("Wassup?");
3| }
4| else {
5| document.write("404: signature not found");
6| }
i tried that, its mostly likely to be a mod conflit, not a EnderIO problem, since iver tried the 3#-10# and 14#-17#(latest) builds on EnderIO on the jenkins site (http://ci.tterrag.com/job/EnderIO-1.8/) my guess is either an EnderCore or EnderIO conflict (the modpack works fine without both them, but since it
already had an issue with journeymap and Weather 2, i would guess a conflict but i cannot find it)
Try downgrading Forge. I've read newer versions are a bit buggy.
"We live on a placid island of ignorance in the midst of black seas of infinity, and it was not meant that we should voyage far."
Im just trying to load forge 1808, enderIO(multiple versions) and EnderCore(latest), no success, ill try to downgrade the forge version, as thats is probably whats going on. ill reply if i get any sucess on that.
Forge 1739 - http://pastebin.com/egB47mXz
Forge 1785 - http://pastebin.com/gxLRKC46
Forge 1808 - http://pastebin.com/Zxaup7Jx
All of them using Endercore - 1.8.9-0.3.0.1-beta
EnderIO-1.8.9-3.0.0.17_alpha
Didnt see any changes between them. But im linking all just in case.
You mean i need to install LLibrary? What should i do to fix it?
thats weird, it shouldnt be installed, since ive created a newly profile and manually installed both ender core and ender io
Ive sent new report logs on the last messages, they were made in a new profile , with different forge versions to make sure its not a new Forge problem, and with different ender IO versions
links to the crash reports on the differents forge versions:
Forge 1739 - http://pastebin.com/egB47mXz
Forge 1785 - http://pastebin.com/gxLRKC46
Forge 1808 - http://pastebin.com/Zxaup7Jx
All of them using Endercore - 1.8.9-0.3.0.1-beta
EnderIO-1.8.9-3.0.0.17_alpha
Didnt see any changes between them. But im linking all just in case.
I can only see 3 options for this problem, either EnderIO, EnderCore or Forge errors. Since i've tried about 10 different EnderIO alpha builds on their jenkins project, its mostly likely to be either a forge or endercore problem. Weird thing is that the EnderCore loads when alone, without EnderIO, but whats are the odds of 17 different builds have the same crash? At least one of them should be stable (and i double checked that they were 1.8.9, so i dont think its a 1.7.10 mod)
Jenkins link to EnderIO - (http://ci.tterrag.com/job/EnderIO-1.8/)
Could you send me the link for the newer EnderCore? the only file i can find is the EnderCore - 1.8.9-0.3.0.1-beta on their curse page (http://minecraft.curseforge.com/projects/endercore/files?sort=game-version) wich is the one im currently using. That with the 17# EnderIO build on jenkins
I tried the newest ones, either newest core with newest enderio, no sucess, and then i tried the lastest Core with 10 Different EnderIO builds. No sucess.
EDIT: found it, i will try run both them.http://ci.tterrag.com/job/EnderCore-1.8/
Got it to work, it was due the EnderCore being too old. I did not find the new one because the newest one they have on Curse servers is the 2 months old.
When using the Newest EnderCore and EnderIO , they work just fine.
Thanks for helping guys!
Links:
http://ci.tterrag.com/job/EnderCore-1.8/lastSuccessfulBuild/artifact/build/libs/EnderCore-1.8.9-0.3.0.12-beta.jar
http://ci.tterrag.com/job/EnderIO-1.8/lastSuccessfulBuild/artifact/build/libs/EnderIO-1.8.9-3.0.0.18_alpha.jar