Does anyone have a working setup to pipe one type of essentia from a barely-full jar to a much fuller one? I'm not super good with pipes in this version apparently, in v5 I remember being able to do this but can't figure out how in v6... bleh All I want to do is recover some jars and wall space!
Rollback Post to RevisionRollBack
How to deal with ignorance (in life, and on forums): The Zen way... Stay cool and polite, treat people as you wish to be treated, rise above your impatience. Everyone is ignorant of something at any point in their lives, including you.
Jars with labels have more suction than ones without labels. Stick a label on the target jar and it should draw from the other jars. Might also need to make the target jar a void jar.
Directional tubes might also work, but the above is how I do it.
Rollback Post to RevisionRollBack
So there I was, knee deep in cobblestone for the fifth time that day...
Jars with labels have more suction than ones without labels. Stick a label on the target jar and it should draw from the other jars. Might also need to make the target jar a void jar.
Directional tubes might also work, but the above is how I do it.
Oh good to know.
My approach to this was to just put a pipe and a filling essentia thingy onto one of the jar, and let the essentia flow over the air to the other one.
Is there a good way to taint an area in creative? I'm trying to make a floating island that is completely tainted for an experiment. If the island gets tainted, will it stay tainted or will it eventually even out?
Does anyone have a working setup to pipe one type of essentia from a barely-full jar to a much fuller one? I'm not super good with pipes in this version apparently, in v5 I remember being able to do this but can't figure out how in v6... bleh All I want to do is recover some jars and wall space!
Connect them via buffer, and redband the direction where you want the essentia go. Then attach enough bellows to empty the jar.
I can show you my complete distillation setup, but it's quite complex and hard to digest without explanation.
Jars with labels have more suction than ones without labels. Stick a label on the target jar and it should draw from the other jars. Might also need to make the target jar a void jar.
Directional tubes might also work, but the above is how I do it.
I have the target set as a Void jar, labeled, too, which happens to be full (I wonder if this is why it's not working, as I currently can't empty an alembic with a full Void jar either). Connecting the 2 jars together with simple pipes doesn't work. I tried a directional pipe but it's fiddly, doesn't always show me the blue band, not sure if this is a bug... when I connect the dir. pipe to a jar, then I get the blue band. If I connect it onto another pipe? No band.
Connect them via buffer, and redband the direction where you want the essentia go. Then attach enough bellows to empty the jar.
I can show you my complete distillation setup, but it's quite complex and hard to digest without explanation.
You know what, if you want to just screenshot your setup and post it, I'll just grab a beer and figure out the puzzle. At the moment I'm just confused and I don't know if I'm headbutting with bugs or just expecting things to behave a certain way when they aren't meant to work like that... Lemme see something that does work.
Rollback Post to RevisionRollBack
How to deal with ignorance (in life, and on forums): The Zen way... Stay cool and polite, treat people as you wish to be treated, rise above your impatience. Everyone is ignorant of something at any point in their lives, including you.
Is there a good way to taint an area in creative? I'm trying to make a floating island that is completely tainted for an experiment. If the island gets tainted, will it stay tainted or will it eventually even out?
Oh yeah. Easiest way?
Find a desert or dead-type biome in which to make your island (they have low aura). Make a crucible there. Even better, make 2-3 crucibles. Fill them up. Dump 20 stacks of 64 cobblestone in there. Everything will be tainted for decades.
Please report your duration findings.
Rollback Post to RevisionRollBack
How to deal with ignorance (in life, and on forums): The Zen way... Stay cool and polite, treat people as you wish to be treated, rise above your impatience. Everyone is ignorant of something at any point in their lives, including you.
I have just recently set up my Thaumatorium and I wanted it to draw essentia from my jars via an emptying essentia transfuser. The problem is, when i try to start a recipe, the transfuser is not pulling any essentia from my jars to fulfill the request. I thought maybe the problem was that it wont let it pull into pipes, so I attached the transfuser straight to the Thaumatorium but i got similar results. Is this a known bug? Any help on how to make this work would be much appreciated. Thanks!
I have the target set as a Void jar, labeled, too, which happens to be full (I wonder if this is why it's not working, as I currently can't empty an alembic with a full Void jar either). Connecting the 2 jars together with simple pipes doesn't work. I tried a directional pipe but it's fiddly, doesn't always show me the blue band, not sure if this is a bug... when I connect the dir. pipe to a jar, then I get the blue band. If I connect it onto another pipe? No band.
Are you also using full Void jars sometimes?
You know what, if you want to just screenshot your setup and post it, I'll just grab a beer and figure out the puzzle. At the moment I'm just confused and I don't know if I'm headbutting with bugs or just expecting things to behave a certain way when they aren't meant to work like that... Lemme see something that does work.
The one you want empty is not labelled right? Only the one you want to fill must be labelled. I used that method of connecting the jars and place the label only on the one I want filled and worked fine, even when it was an full void jar, but that was back in 1.10.2, maybe it's bugged
The Meaning of Life, the Universe, and Everything.
Join Date:
4/1/2018
Posts:
51
Member Details
i hope we get a new version to fix the desync issues sometime soon, i only get a visually correct golem to what it actually is if i break and replace them about 3 times on average, also the runic matrix has very severe desync issues with the pedestals, if something gets knocked off you have to right click twice otherwise it will stay glitched visually but not actually on the pedestal.
You know what, if you want to just screenshot your setup and post it, I'll just grab a beer and figure out the puzzle. At the moment I'm just confused and I don't know if I'm headbutting with bugs or just expecting things to behave a certain way when they aren't meant to work like that... Lemme see something that does work.
My explanation of how it works? Simple: you really want to operate a brewery IRL, but the hops are bad where you live, so this is the second-best thing. It has high resistance to clogging because there is never any beer in the system due to it being drunk from the tap. Your resistance level is "Andre the Giant".
Seriously though, this is pretty nifty. Once I get my Ordo farm in order (!) I'll probably try to duplicate it.
No Void jars though?
Rollback Post to RevisionRollBack
How to deal with ignorance (in life, and on forums): The Zen way... Stay cool and polite, treat people as you wish to be treated, rise above your impatience. Everyone is ignorant of something at any point in their lives, including you.
The one you want empty is not labelled right? Only the one you want to fill must be labelled. I used that method of connecting the jars and place the label only on the one I want filled and worked fine, even when it was an full void jar, but that was back in 1.10.2, maybe it's bugged
The one I want to empty is not labelled, and the target Void jar is. I'm seeing 32 suction on both the labeled full Void jar, and the unlabeled Warded jar I want to empty.
Edit: I think I need to experiment more because this is a case of "you're remembering how things worked wrong, you old fart".
Edit 2: Suction on a labeled not full Void jar = 48. Suction on a labeled full void jar = 32. Shouldn't Void jars always suck more even when they're full, that's what they're for right?
How to deal with ignorance (in life, and on forums): The Zen way... Stay cool and polite, treat people as you wish to be treated, rise above your impatience. Everyone is ignorant of something at any point in their lives, including you.
My explanation of how it works? Simple: you really want to operate a brewery IRL, but the hops are bad where you live, so this is the second-best thing.
Seriously though, this is pretty nifty. Once I get my Ordo farm in order (!) I'll probably try to duplicate it.
The key point is essentia circulation in the buffers of the top loop. It always moves forward and always returns to the first buffer, if no jars have picked it up.
The total resistance factor equals the total sum of buffers inner space.
This creative simulation setup has resistance of approx 150 units of essentia.
No Void jars though?
Void jars could easily be connected to the sides of the filter tubes. Once you have your setup expanded in width to fit all types of essence, you can expand it in depth almost infinitely.
So...how do I make Arcane Stone? I haven't found the recipe anywhere at all in the Thaumonomicon (TC6). I assume it's the same as the old method, but there really should be a page with the recipe, especially considering how many early pages have recipes requiring it.
Rollback Post to RevisionRollBack
~~~~~~~~
Fall into the hands of sorrow
Drawn by the darkest bay
Walk into the pit of silence
I am the one calling your name
~~~~~~~~
It doesn't. It's the only thing so far that doesn't do it.
If it won't show up in NEI/JEI, then you need to look it up in the Thaumonomicon.
Rollback Post to RevisionRollBack
I just took the Minecraft Noob test! Check out what I scored. Think you can beat me?!
To take the test, check out https://minecraftnoobtest.com/test.php
The Thaumonomicon doesn't have the recipe. Check it for yourself, the search function (bottom left) doesn't list Arcane stone.
Rollback Post to RevisionRollBack
How to deal with ignorance (in life, and on forums): The Zen way... Stay cool and polite, treat people as you wish to be treated, rise above your impatience. Everyone is ignorant of something at any point in their lives, including you.
Does anyone have a working setup to pipe one type of essentia from a barely-full jar to a much fuller one? I'm not super good with pipes in this version apparently, in v5 I remember being able to do this but can't figure out how in v6... bleh
All I want to do is recover some jars and wall space!
How to deal with ignorance (in life, and on forums): The Zen way... Stay cool and polite, treat people as you wish to be treated, rise above your impatience. Everyone is ignorant of something at any point in their lives, including you.
Jars with labels have more suction than ones without labels. Stick a label on the target jar and it should draw from the other jars. Might also need to make the target jar a void jar.
Directional tubes might also work, but the above is how I do it.
Oh good to know.
My approach to this was to just put a pipe and a filling essentia thingy onto one of the jar, and let the essentia flow over the air to the other one.
Is there a good way to taint an area in creative? I'm trying to make a floating island that is completely tainted for an experiment. If the island gets tainted, will it stay tainted or will it eventually even out?
Connect them via buffer, and redband the direction where you want the essentia go. Then attach enough bellows to empty the jar.
I can show you my complete distillation setup, but it's quite complex and hard to digest without explanation.
I have the target set as a Void jar, labeled, too, which happens to be full (I wonder if this is why it's not working, as I currently can't empty an alembic with a full Void jar either). Connecting the 2 jars together with simple pipes doesn't work. I tried a directional pipe but it's fiddly, doesn't always show me the blue band, not sure if this is a bug... when I connect the dir. pipe to a jar, then I get the blue band. If I connect it onto another pipe? No band.
Are you also using full Void jars sometimes?
You know what, if you want to just screenshot your setup and post it, I'll just grab a beer and figure out the puzzle. At the moment I'm just confused and I don't know if I'm headbutting with bugs or just expecting things to behave a certain way when they aren't meant to work like that... Lemme see something that does work.
How to deal with ignorance (in life, and on forums): The Zen way... Stay cool and polite, treat people as you wish to be treated, rise above your impatience. Everyone is ignorant of something at any point in their lives, including you.
Oh yeah. Easiest way?
Find a desert or dead-type biome in which to make your island (they have low aura). Make a crucible there. Even better, make 2-3 crucibles. Fill them up. Dump 20 stacks of 64 cobblestone in there. Everything will be tainted for decades.
Please report your duration findings.
How to deal with ignorance (in life, and on forums): The Zen way... Stay cool and polite, treat people as you wish to be treated, rise above your impatience. Everyone is ignorant of something at any point in their lives, including you.
I have just recently set up my Thaumatorium and I wanted it to draw essentia from my jars via an emptying essentia transfuser. The problem is, when i try to start a recipe, the transfuser is not pulling any essentia from my jars to fulfill the request. I thought maybe the problem was that it wont let it pull into pipes, so I attached the transfuser straight to the Thaumatorium but i got similar results. Is this a known bug? Any help on how to make this work would be much appreciated. Thanks!
The one you want empty is not labelled right? Only the one you want to fill must be labelled. I used that method of connecting the jars and place the label only on the one I want filled and worked fine, even when it was an full void jar, but that was back in 1.10.2, maybe it's bugged
i hope we get a new version to fix the desync issues sometime soon, i only get a visually correct golem to what it actually is if i break and replace them about 3 times on average, also the runic matrix has very severe desync issues with the pedestals, if something gets knocked off you have to right click twice otherwise it will stay glitched visually but not actually on the pedestal.
"You asked for it." Awaiting your explanation of how it works and why it has high resistance to clogging. And what is the actual limit on said resistance.
Distillation setup: front... (411 kB)
...and back. (363 kB)
My explanation of how it works? Simple: you really want to operate a brewery IRL, but the hops are bad where you live, so this is the second-best thing. It has high resistance to clogging because there is never any beer in the system due to it being drunk from the tap. Your resistance level is "Andre the Giant".
Seriously though, this is pretty nifty. Once I get my Ordo farm in order (!) I'll probably try to duplicate it.
No Void jars though?
How to deal with ignorance (in life, and on forums): The Zen way... Stay cool and polite, treat people as you wish to be treated, rise above your impatience. Everyone is ignorant of something at any point in their lives, including you.
The one I want to empty is not labelled, and the target Void jar is. I'm seeing 32 suction on both the labeled full Void jar, and the unlabeled Warded jar I want to empty.
Edit: I think I need to experiment more because this is a case of "you're remembering how things worked wrong, you old fart".
Edit 2: Suction on a labeled not full Void jar = 48. Suction on a labeled full void jar = 32. Shouldn't Void jars always suck more even when they're full, that's what they're for right?
How to deal with ignorance (in life, and on forums): The Zen way... Stay cool and polite, treat people as you wish to be treated, rise above your impatience. Everyone is ignorant of something at any point in their lives, including you.
The key point is essentia circulation in the buffers of the top loop. It always moves forward and always returns to the first buffer, if no jars have picked it up.
The total resistance factor equals the total sum of buffers inner space.
This creative simulation setup has resistance of approx 150 units of essentia.
Void jars could easily be connected to the sides of the filter tubes. Once you have your setup expanded in width to fit all types of essence, you can expand it in depth almost infinitely.
So...how do I make Arcane Stone? I haven't found the recipe anywhere at all in the Thaumonomicon (TC6). I assume it's the same as the old method, but there really should be a page with the recipe, especially considering how many early pages have recipes requiring it.
~~~~~~~~
Fall into the hands of sorrow
Drawn by the darkest bay
Walk into the pit of silence
I am the one calling your name
~~~~~~~~
Click it?… It should show you the recipe.
It doesn't. It's the only thing so far that doesn't do it.
~~~~~~~~
Fall into the hands of sorrow
Drawn by the darkest bay
Walk into the pit of silence
I am the one calling your name
~~~~~~~~
If it won't show up in NEI/JEI, then you need to look it up in the Thaumonomicon.
I just took the Minecraft Noob test! Check out what I scored. Think you can beat me?!
To take the test, check out
https://minecraftnoobtest.com/test.php
Don't click this link, HE is haunting it...
Does anyone know what items contain alkimia for version 6.1 beta 13?
The Thaumonomicon doesn't have the recipe. Check it for yourself, the search function (bottom left) doesn't list Arcane stone.
How to deal with ignorance (in life, and on forums): The Zen way... Stay cool and polite, treat people as you wish to be treated, rise above your impatience. Everyone is ignorant of something at any point in their lives, including you.