Parallelize, don't pump more power into one machine. You'll be more efficient with your electrolyser power input that way. (Make three electrolysers and put one turbine and VDG on each.)
Parallelize, don't pump more power into one machine. You'll be more efficient with your electrolyser power input that way. (Make three electrolysers and put one turbine and VDG on each.)
It is important to realize that the VDG is one of the only machines for which that holds true at high power levels.
Rollback Post to RevisionRollBack
I am the developer of many mods, most famously RotaryCraft and ChromatiCraft.
Feel free to support me and my mods via PayPal or Patreon
I use my own modpack and i have about 130 mods installed. I Dragon Api v25 and coresponding rotary craft and reactor craft. I found Problem. Dragon api brakes sound in different mod which is the addon of OpenComputers called Computronics. I installed only OpenComputers, Computronics and AsieLib. After writing song on tape everything works perfectly fine. But when i install Dragon API v25 and rotary craft with reactor craft there are still normall world sounds comming from blocks but tapes with music and even speech box which is text to spech component instantly brakes. GUi is working but there is no sound comming from tapes etc. same problem is with very old dragon api v9. LINK to Computronics: "https://wiki.vexatos.com/wiki:computronics"
Which tool to use in order to link two warp nexus? I have tried right clicking with manipulator and a linker on the pair of warp gate but nothing happen.
I am on V25b of Reactor Craft. The neutron absorbers in my fusion power plant absorb neutrons just fine and heat up. They also dissipate/spread the heat to their surrounding steam boilers but those do not heat up. They just stay at 25°C biome temperature. It worked before in v23 as from where i upgraded. Cause of this no steam is being generated.
Another thing are Rotary Craft centrifuges. They used to just spin in a normal rotation, now they just wobble like a disk that has more mass on one side and thus are out of balance.
And another question regarding Chromaticraft is how do i get the Casting Delegate to work. I have it placed above the complex, the effect is shown, but neither with a chest nor with an ME-Cable attached to my storage does it want to work. It has drawn lumen from my network and it is using a channel from my ME-System.
And another question regarding Chromaticraft is how do i get the Casting Delegate to work. I have it placed above the complex, the effect is shown, but neither with a chest nor with an ME-Cable attached to my storage does it want to work. It has drawn lumen from my network and it is using a channel from my ME-System
Have you set up the lower tier automation -> item insertion focus + relay? Casting Delegate doesn't work without that. Do check out the description on casting stand insertion focus.
I have them crafted, but actually not placed cause i could just not figure out where to place em but at least that makes sense now. Sometimes the book just leaves you with even more questions then answers.
Okay that got it working, i was confused a bit cause of the runes you had to place for some crafts, but turns out they act as them and now it works propperly, thanks for the hint in that direction^^
If you see the entry for item insertion relay, it would tell you how many relay you need and the location to place them. The item insertion focus entry will tell you where to place it!
any hint for the crystal interference puzzle ? I understand that the crystals emit a ray in line/column and also affect the "piece" they're put on, but I don't understand what is supposed to be done there
any hint for the crystal interference puzzle ? I understand that the crystals emit a ray in line/column and also affect the "piece" they're put on, but I don't understand what is supposed to be done there
I'm not sure if this was the intended design or a bug..
Crystal Interference: Basically it is a jigsaw sudoku. But I never had a puzzle generate the correct number of coloured. For example a 4x4 puzzle should only have 4 different colour crystals but I get a range of 7 to 9 different colours and that confused me until I cleared the board and used my own set of colours since I figured there wasn't any restriction on the specific colours you can used.
HP-Turbine only 2 layer (steam-injektion + 1 turbine), is correct multiblock formed. Inject lubricant, is flows in. Show in front centerblock 128000mb/block, Power being received from [none]
i feed them from 2x1 heatexchanger surround from 3 steamboilers=6 boilers. heatexchanger feed with hot molten sodium. at last steamline before in turbine ~60m² steam in line.
low pressuize water flow out at front, but it dont begin to start!. construction is free in the air. in debugtest it runs, so it dont blocked by other blocks i think.
You mean the Dust ?
You can mine it in the caves in proxima, that lead to an exit
No, I don't need proximity dust. There is an item called lumen essence, the kind you need for turbocharging repeaters, upgrading self max capacity. I found some lumen essence liquid in radiant fissures biome but I cannot figure out how to obtain lumen essence from processing the liquid.
for all colors "What"?
All color who needed for the enhancement are available (for crystale repeater) on this place yes
ALL color for now are not connected.
With ALL color are not crafted.
i got it!
Ritual table has only 16m lumen reception range, crystal charger 20m
4 BIG METERs
sry
Hey I seem to use oxygen faster than I can make with a setup of 3 VGD + 3 microturbine to a electrolyzer. any tips to increase the quantity of oxygen?
Parallelize, don't pump more power into one machine. You'll be more efficient with your electrolyser power input that way. (Make three electrolysers and put one turbine and VDG on each.)
Advanced Rocketry and Reika's mods
It is important to realize that the VDG is one of the only machines for which that holds true at high power levels.
Thanks a lot on the oxygen. Got a steady supply to sustain constant flow of HSLA steel.
Hello
I use my own modpack and i have about 130 mods installed. I Dragon Api v25 and coresponding rotary craft and reactor craft. I found Problem. Dragon api brakes sound in different mod which is the addon of OpenComputers called Computronics. I installed only OpenComputers, Computronics and AsieLib. After writing song on tape everything works perfectly fine. But when i install Dragon API v25 and rotary craft with reactor craft there are still normall world sounds comming from blocks but tapes with music and even speech box which is text to spech component instantly brakes. GUi is working but there is no sound comming from tapes etc. same problem is with very old dragon api v9. LINK to Computronics: "https://wiki.vexatos.com/wiki:computronics"
Which tool to use in order to link two warp nexus? I have tried right clicking with manipulator and a linker on the pair of warp gate but nothing happen.
I am on V25b of Reactor Craft. The neutron absorbers in my fusion power plant absorb neutrons just fine and heat up. They also dissipate/spread the heat to their surrounding steam boilers but those do not heat up. They just stay at 25°C biome temperature. It worked before in v23 as from where i upgraded. Cause of this no steam is being generated.
Another thing are Rotary Craft centrifuges. They used to just spin in a normal rotation, now they just wobble like a disk that has more mass on one side and thus are out of balance.
And another question regarding Chromaticraft is how do i get the Casting Delegate to work. I have it placed above the complex, the effect is shown, but neither with a chest nor with an ME-Cable attached to my storage does it want to work. It has drawn lumen from my network and it is using a channel from my ME-System.
Hi Reika,
how is casting delegate to use?
I place it on high of diamond blocks. Spinning white particals spawn. i also connect to ME-System on the top, channel is used.
From Chromabook or select at casting delegate him self dont produce any item, like crystal stone or other simplce receipt.
Something wrong or more thing need to work?
Thx a lot
Have you set up the lower tier automation -> item insertion focus + relay? Casting Delegate doesn't work without that. Do check out the description on casting stand insertion focus.
I have them crafted, but actually not placed cause i could just not figure out where to place em but at least that makes sense now. Sometimes the book just leaves you with even more questions then answers.
Okay that got it working, i was confused a bit cause of the runes you had to place for some crafts, but turns out they act as them and now it works propperly, thanks for the hint in that direction^^
If you see the entry for item insertion relay, it would tell you how many relay you need and the location to place them. The item insertion focus entry will tell you where to place it!
Yeah it works now very well. I just re-read that page after finding it and was like "oh my..." happens, mystery solved, thanks!
any hint for the crystal interference puzzle ? I understand that the crystals emit a ray in line/column and also affect the "piece" they're put on, but I don't understand what is supposed to be done there
I'm not sure if this was the intended design or a bug..
Crystal Interference: Basically it is a jigsaw sudoku. But I never had a puzzle generate the correct number of coloured. For example a 4x4 puzzle should only have 4 different colour crystals but I get a range of 7 to 9 different colours and that confused me until I cleared the board and used my own set of colours since I figured there wasn't any restriction on the specific colours you can used.
hello,
some issue at ReactorCraft
HP-Turbine only 2 layer (steam-injektion + 1 turbine), is correct multiblock formed. Inject lubricant, is flows in. Show in front centerblock 128000mb/block, Power being received from [none]
i feed them from 2x1 heatexchanger surround from 3 steamboilers=6 boilers. heatexchanger feed with hot molten sodium. at last steamline before in turbine ~60m² steam in line.
low pressuize water flow out at front, but it dont begin to start!. construction is free in the air. in debugtest it runs, so it dont blocked by other blocks i think.
some more to do?
Thx a lot
How do I get lumen essence? I have a few drums of lumen essence liquid, but I can't figure out how to get lumen essence out from it.
You mean the Dust ?
You can mine it in the caves in proxima, that lead to an exit
No, I don't need proximity dust. There is an item called lumen essence, the kind you need for turbocharging repeaters, upgrading self max capacity. I found some lumen essence liquid in radiant fissures biome but I cannot figure out how to obtain lumen essence from processing the liquid.