Minecraft Forums

I think you should make the recipe book add recipes when you craft them so it isn't OP

Exelent, 100% work all mods :biggrin.gif:

Maybe I am asking a very stupid question, then do not beat me. After I install modloader, should I continue installing other mods as usual (copying their contents into minecraft.jar), or should I put the .zip with the mod into the .minecraft\mods folder?

hey, i am using MCPatcher to intall mod loader and other fun mods, but i need to know, do i need to delete MEta INF?

Quote from Vano47

Maybe I am asking a very stupid question, then do not beat me. After I install modloader, should I continue installing other mods as usual (copying their contents into minecraft.jar), or should I put the .zip with the mod into the .minecraft\mods folder?

It depends on the mod. (At least from what I've seen.) Some require you to put the .zip into the mods folder, while other Modloader-compatible mods (Not necessarily Modloader dependent. Eg. TMI) you should just put the fiels in the minecraft.jar. I'm not super sure on this, but if you follow the install instructions on the mod page, and check it's compatibility (If you're using other mods.) everything should work fine.

Quote from MrDare360

I have asked on there but they didn't even listen to me

You can try to send Risugami a PM there, don't know what else to tell you, sorry.

Quote from Thoran_ShadowBlade

@Dweller_Benthos ok so i reinstalled modloader again, still same prob heres error report tho

===Simple Minecraft Error Test===

Starting Minecraft...

Exception in thread "main" java.lang.IncompatibleClassChangeError: Implementing
class
at java.lang.ClassLoader.defineClass1(Native Method)
at java.lang.ClassLoader.defineClassCond(Unknown Source)
at java.lang.ClassLoader.defineClass(Unknown Source)
at java.security.SecureClassLoader.defineClass(Unknown Source)
at java.net.URLClassLoader.defineClass(Unknown Source)
at java.net.URLClassLoader.access$000(Unknown Source)
at java.net.URLClassLoader$1.run(Unknown Source)
at java.security.AccessController.doPrivileged(Native Method)
at java.net.URLClassLoader.findClass(Unknown Source)
at java.lang.ClassLoader.loadClass(Unknown Source)
at sun.misc.Launcher$AppClassLoader.loadClass(Unknown Source)
at java.lang.ClassLoader.loadClass(Unknown Source)
at rg.<init>(SourceFile:19)
at iw.<init>(SourceFile:22)
at lk.<init>(SourceFile:26)
at net.minecraft.client.Minecraft.<init>(SourceFile:101)
at ahy.<init>(SourceFile:2054)
at net.minecraft.client.Minecraft.a(SourceFile:2052)
at net.minecraft.client.Minecraft.a(SourceFile:2035)
at net.minecraft.client.Minecraft.main(SourceFile:2114)

Sorry, I don't know what's causing that error. Have you tried using the texture patcher?

Quote from Rockerbob09

I have one question
What do I do after I downloaded MobLoader?
Would be nice if you good PM me what next.

Follow the instructions in the OP. You have to install it, easiest way is to use the texture patcher.
http://www.minecraftforum.net/topic/232701-100-11w49aupdate-128-mcpatcher-hd-fix-223/

Quote from MewRai95

I installed the ModLoader several times even looking at tutorial videos to make sure and this happens every time I boot up Minecraft.. and yes I'm using 1.0.0.. What should I do?

I can't see the rest of the error report, copy & paste all the text here.

Quote from Creeperbuild

I do it right, but i run my minecraft and it crashes! WHAT DO I DO D:

Post modloader.txt (in your .minecraft folder) or use this to get an error report:
http://dl.dropbox.com/u/22096331/debug/minecrafterrortest.bat

Or use the texture patcher to install mods, it's easier. Start from a clean jar first.
http://www.minecraftforum.net/topic/232701-100-11w49aupdate-128-mcpatcher-hd-fix-223/

Quote from DrewTheAwesome

Yeah, i'm getting a lot of errors in relation to java.lang.VerifyError
It's just modloader, nothing else, annoyingly.

Here's the full error report:

--- BEGIN ERROR REPORT 141ccf11 --------
Generated 20/12/11 19:09

Minecraft: Minecraft 1.0.0
OS: Windows XP (x86) version 5.1
Java: 1.7.0_02, Oracle Corporation
VM: Java HotSpot(TM) Client VM (mixed mode), Oracle Corporation
LWJGL: 2.4.2
OpenGL: GeForce 8400 GS/PCI/SSE2 version 2.1.1, NVIDIA Corporation

java.lang.VerifyError: (class: mod_EE, method: <init> signature: ()V) Incompatible argument to function
	at java.lang.Class.getDeclaredFields0(Native Method)
	at java.lang.Class.privateGetDeclaredFields(Unknown Source)
	at java.lang.Class.privateGetPublicFields(Unknown Source)
	at java.lang.Class.getFields(Unknown Source)
	at ModLoader.setupProperties(ModLoader.java:1697)
	at ModLoader.addMod(ModLoader.java:274)
	at ModLoader.readFromModFolder(ModLoader.java:1293)
	at ModLoader.init(ModLoader.java:826)
	at ModLoader.AddAllRenderers(ModLoader.java:186)
	at wb.<init>(wb.java:76)
	at wb.<clinit>(wb.java:9)
	at net.minecraft.client.Minecraft.a(SourceFile:265)
	at net.minecraft.client.Minecraft.run(SourceFile:644)
	at java.lang.Thread.run(Unknown Source)
--- END ERROR REPORT 56aca18d ----------

Danke.

That's a problem with EE mod, which I think is equivalent exchange? Go to that thread and see if there's any info.

Quote from Vano47

Maybe I am asking a very stupid question, then do not beat me. After I install modloader, should I continue installing other mods as usual (copying their contents into minecraft.jar), or should I put the .zip with the mod into the .minecraft\mods folder?

As has been mentioned, it depends on the mod you want to install. Some have to be installed into the jar directly, others can just be dropped into the mods folder. Some are both.

Quote from FlashFighter212

hey, i am using MCPatcher to intall mod loader and other fun mods, but i need to know, do i need to delete MEta INF?

The patcher automatically deletes the META-INF folder correctly for your OS. Once the patcher is done, you should be all set.

nevermind

Quote from Dweller_Benthos

You can try to send Risugami a PM there, don't know what else to tell you, sorry.


Sorry, I don't know what's causing that error. Have you tried using the texture patcher?


Follow the instructions in the OP. You have to install it, easiest way is to use the texture patcher.
http://www.minecraftforum.net/topic/232701-100-11w49aupdate-128-mcpatcher-hd-fix-223/


I can't see the rest of the error report, copy & paste all the text here.


Post modloader.txt (in your .minecraft folder) or use this to get an error report:
http://dl.dropbox.com/u/22096331/debug/minecrafterrortest.bat

Or use the texture patcher to install mods, it's easier. Start from a clean jar first.
http://www.minecraftforum.net/topic/232701-100-11w49aupdate-128-mcpatcher-hd-fix-223/


That's a problem with EE mod, which I think is equivalent exchange? Go to that thread and see if there's any info.


As has been mentioned, it depends on the mod you want to install. Some have to be installed into the jar directly, others can just be dropped into the mods folder. Some are both.


The patcher automatically deletes the META-INF folder correctly for your OS. Once the patcher is done, you should be all set.

then how come i try to use mod loader and Audiomod , my MC game shows a black screen. Is it because they share similar class files? If so, which ones should i delete?

I've been using Risugami's mods for a long time, but today AudioMod gave me an error.
It looks like this:

how do you turn biospheres off

Once we have dropped all the modloader files(acr.class, afe.class, etc.) into mincraft.jar, and ran minecraft, I'm good to go right? I can start downloading mods like Tale of Kingdoms or whatnot, and shouldnt encounter problems?

sorry if this seems dumb, but I havn't had the best of luck with mods in the past, and would like to be sure I did things right.

Quote from FlashFighter212

then how come i try to use mod loader and Audiomod , my MC game shows a black screen. Is it because they share similar class files? If so, which ones should i delete?

There must be a problem when you install it. Install modloader, then install audio mod. Be sure to copy over ALL the files and folders from the zip files for each mod. A lot of people forget the extra folders that sometimes need to be copied over.

Or use the texture patcher to install mods, it's a lot easier
http://www.minecraftforum.net/topic/232701-100-11w49aupdate-128-mcpatcher-hd-fix-223/

Quote from Nilmrots

I've been using Risugami's mods for a long time, but today AudioMod gave me an error.
It looks like this:

Mods loaded: 2
ModLoader 1.0.0
mod_TooManyItems 1.0.0 2011-11-29

Minecraft has crashed!
----------------------

Minecraft has stopped running because it encountered a problem.

If you wish to report this, please copy this entire text and email it to [email protected].
Please include a description of what you did when the error occured.



--- BEGIN ERROR REPORT e7092d14 --------
Generated 12/20/11 5:01 PM

Minecraft: Minecraft 1.0.0
OS: Windows 7 (x86) version 6.1
Java: 1.7.0_01, Oracle Corporation
VM: Java HotSpot(TM) Client VM (mixed mode), Oracle Corporation
LWJGL: 2.4.2
OpenGL: GeForce 310/PCI/SSE2 version 3.2.0, NVIDIA Corporation

java.util.zip.ZipException: invalid entry CRC (expected 0x0 but got 0xb9ddc23e)
at java.util.zip.ZipInputStream.read(ZipInputStream.java:218)
at java.util.zip.ZipInputStream.closeEntry(ZipInputStream.java:139)
at java.util.zip.ZipInputStream.getNextEntry(ZipInputStream.java:117)
at ModLoader.readFromClassPath(ModLoader.java:1221)
at ModLoader.init(ModLoader.java:825)
at ModLoader.AddAllRenderers(ModLoader.java:186)
at wb.<init>(wb.java:76)
at wb.<clinit>(wb.java:9)
at net.minecraft.client.Minecraft.a(SourceFile:265)
at net.minecraft.client.Minecraft.run(SourceFile:644)
at java.lang.Thread.run(Thread.java:722)
--- END ERROR REPORT db0bcda5 ----------

That's a corrupt JAR file, either something went wrong, or the zip utility you used messed up the JAR. Use 7zip or winrar if you aren't already, and start from a clean JAR file.

Quote from DrewTheAwesome

It aint a problem with Equivalent Echange, that's literally just modloader when i'm trying to get down to the bottom of what's not working for me, and it's modloader apparently. I'm not even using equivalent exchange

Well, mod_EE is what's crashing, not modloader, I was just guessing it was equivalent exchange, same initials, right? So what other mods are you trying to install, because modloader is working fine.

Remember, there may be old mod files in the mods folder, clear them out.

Quote from theminecrafter123

how do you turn biospheres off

Go to the config folder, find the biospheres config file, open it in notepad, and find the line that says something like enabled=true and set it to false. Save, close and run minecraft.

Quote from karlfranz90

Once we have dropped all the modloader files(acr.class, afe.class, etc.) into mincraft.jar, and ran minecraft, I'm good to go right? I can start downloading mods like Tale of Kingdoms or whatnot, and shouldnt encounter problems?

sorry if this seems dumb, but I havn't had the best of luck with mods in the past, and would like to be sure I did things right.

Be sure to read the install instructions for the other mods you want to install. Some have to be installed into the JAR with modloader and some can just be dropped into the mods folder under your minecraft folder.

Quote from GyulaMasa

This is exactly, what happened/happens to my Minecraft... I found, that it really breaks, when I add wb.class into the minecraft.jar.
All other .class files could be dropped into the jar without any problem, and the game goes forward into the starting screen.
Installing Java7 just kills the game in general. There is a black screen right after login. (except for a very short flashing of the "updating" screen.
My question is: is there anyone out there to take care of this issue?
Also I would kindly ask how can I help more to solve this issue?

Are you on linux as well? Can't help with linux installs, if you can't get java 7 working, then I don't know what to tell you.

Quote from surf_meister

Im just getting black screen after logging in. I've deleted META-INF and have followed 3-4 different tutorials to the letter. What else could be going wrong or is the current version of ModLoader broken?

Post modloader.txt (in your minecraft folder) or use this to get an error report:
http://dl.dropbox.com/u/22096331/debug/minecrafterrortest.bat
Then maybe we'll have enough information to help.

Or use the texture patcher to install mods
http://www.minecraftforum.net/topic/232701-100-11w49aupdate-128-mcpatcher-hd-fix-223/

Quote from GyulaMasa

This is exactly, what happened/happens to my Minecraft... I found, that it really breaks, when I add wb.class into the minecraft.jar.
All other .class files could be dropped into the jar without any problem, and the game goes forward into the starting screen.
Installing Java7 just kills the game in general. There is a black screen right after login. (except for a very short flashing of the "updating" screen.
My question is: is there anyone out there to take care of this issue?
Also I would kindly ask how can I help more to solve this issue?

THANK YOU SO ****ING MUCH

But do you know if the mods will continue to work without that file?

Modloader never works for me. Every time I install it Minecraft crashes... :sad.gif:
Can someone please help me?

Equivilant Exchange doesn't work with this. I got them and turned Minecraft on, and it started the "update" screen, and froze about 1/10 from the end at "Done Loading".

I have a problem installing Biospheres. I noticed that this post doesn't tell you how, so I looked it up. According to a post, I download it, extract it (didn't say where to) and put the files in the Minecraft.JAR. I did so, (extracting the files to the location they were already at) and when I start a new world, I see a flash of a "generating terrain" and then it blank screens and crashes.

Quote from cheddercheese99

Equivilant Exchange doesn't work with this. I got them and turned Minecraft on, and it started the "update" screen, and froze about 1/10 from the end at "Done Loading".

if you want to install EE you HAVE to install
1) MODLOADER
2) MODLOADER MP
3) FORGE API LINK
in that EXACT ORDER then follow the instructions on how to install EE

Hope that helps.

Quote from 10DegreesBelow

THANK YOU SO ****ING MUCH

But do you know if the mods will continue to work without that file?

No, you need to install all the files. If you're on linux and can't get java 7 working (I'm not 100% sure you need java 7 though) try using the texture patcher to install maybe? Otherwise I'm out of ideas.

http://www.minecraftforum.net/topic/232701-100-11w49aupdate-128-mcpatcher-hd-fix-223/

Quote from WeirdOrange

Modloader never works for me. Every time I install it Minecraft crashes... :sad.gif:
Can someone please help me?

Post modloader.txt (in your .minecraft folder) or use this to get an error report:
http://dl.dropbox.com/u/22096331/debug/minecrafterrortest.bat

Or use the texture patcher to install mods, it's easier. Start from a clean jar first.
http://www.minecraftforum.net/topic/232701-100-11w49aupdate-128-mcpatcher-hd-fix-223/

Quote from cheddercheese99

I have a problem installing Biospheres. I noticed that this post doesn't tell you how, so I looked it up. According to a post, I download it, extract it (didn't say where to) and put the files in the Minecraft.JAR. I did so, (extracting the files to the location they were already at) and when I start a new world, I see a flash of a "generating terrain" and then it blank screens and crashes.

Yes, you have to install it just like any other mod. Post modloader.txt (in your .minecraft folder) or use this to get an error report:
http://dl.dropbox.com/u/22096331/debug/minecrafterrortest.bat

Or use the texture patcher to install mods, it's easier. Start from a clean jar first.
http://www.minecraftforum.net/topic/232701-100-11w49aupdate-128-mcpatcher-hd-fix-223/

Quote from Diogenes

I tryed to install ModLoader manually, but I'm just getting a blackscreeen when I start the game.

When I installed it using MCPatcher and tryed to test it, MCP reported the following error:


Exception in thread "main" java.lang.VerifyError: (class: wp, method: <init> signature: (Loq;)V) Incompatible argument to function
at nt.<clinit>(SourceFile:117)
at or.<init>(SourceFile:14)
at net.minecraft.client.Minecraft.<init>(SourceFile:169)
at gw.<init>(SourceFile:2050)
at net.minecraft.client.Minecraft.a(SourceFile:2050)
at net.minecraft.client.Minecraft.a(SourceFile:2033)
at net.minecraft.client.Minecraft.main(SourceFile:2112)


I'm not much of a computer expert, so I would really appreciate any help you could offer. :wink.gif:

Be sure you're starting from a clean JAR file (force update from the minecraft launcher) and be sure you're using the latest download of modloader. Using the texture patcher is the easiest way to go, but I don't know specifically what that error is or what causes it. You can try to get help in the IRC channel mentioned in the OP.

Quote from beastialityTV

mod-loader has always worked for me, but ever since today and the end of yesterday it hasn't been working, it just mojang screens me???? has anyone else got this and how can i solve this??????????

Post modloader.txt (in your .minecraft folder) or use this to get an error report:
http://dl.dropbox.com/u/22096331/debug/minecrafterrortest.bat

Or use the texture patcher to install mods, it's easier. Start from a clean jar first.
http://www.minecraftforum.net/topic/232701-100-11w49aupdate-128-mcpatcher-hd-fix-223/

hay resugami u should make ur mods for smp