let me make sure i am correct, you found the tmi patch in THIS thread?
I've only used Barhandar's patch, so I'm not sure if Jay's added such a button. If that's the case, you may want to try Barhandar's instead and see if that solves the problem.
You can find it in this post. It doesn't add any buttons, it just makes TMI always display exactly what should be displayed (hiding the unusable duplicate IDs from the wiring 1.5.1 to 1.6.0 converter).
I've only used Barhandar's patch, so I'm not sure if Jay's added such a button. If that's the case, you may want to try Barhandar's instead and see if that solves the problem.
He refers to patch from a different user that allows to toggle visibility of excluded IDs (Aether ones, for example).
Visual artifact noticed. Exterior corner rules should be reviewed. On some block faces a bundled cable will posses the exterior corner on one edge and the insulated wire on the other. Same for insulated wires and redwires.
Suggetion: The smaller width wire takes the exterior corner.
Bundled cables will only have exterior corners to other bundled cables.
RedWire to RedWire doesn't matter as look the same. Also with insulated.
Inslated cables will only have exterior corenrs to other insulated wires of the same colour or bundled cables.
That will fix up that unsightly visual glitch :smile.gif:.
I'm just posting here as I notice something... There was something else but I forgot
4bit binary to 7seg converter. Size = 8x5x10. Tileable
With seperate cable backbone and logic structure.
I use MCEdit to copy the cable backbone multiple times.
Fill with the desired colour cable.
Use MCEdit to surround backbone with logic.
4bit binary to 7seg converter. Size = 8x5x10. Tileable
With seperate cable backbone and logic structure.
I use MCEdit to copy the cable backbone multiple times.
Fill with the desired colour cable.
Use MCEdit to surround backbone with logic.
So easy and compact.
No image present. Either you have serious case of imagination, or don't want to share, as evidented by all your non-released fixes.
No image present. Either you have serious case of imagination, or don't want to share, as evidented by all your non-released fixes.
Okay Mr Smarty Pants. Images take time and I have a busy schedule. But here.
Test area
Binary -> BCD converter 7 seg. My bcd is in the bottom of the above image
Decimal Shift/Input Register
Display
I have a very limited imagination. I'm going to quote you when I make a video showing my 5 digit multiple combination lock with 7seg display. And then my ALU and then my CPU.
As for the patches...
My idea is, "Hey guys I made a patch for TMI (all in one) and Optimine/OptiFog for MCF".
while(still cares about people caring about his cool stuff)
{
read_posts();
if (gets posts along the lines of, "Cool a patch for Optimine I want that can you release it")
{
Release_with_link();
Reply("Sure here it is");
}
else
{
Think("No one cares. Oh well");
}
}
Am I to take your "You don't want to share" as an I want patch please?
I would appreciate a reply along the lines of sorry I was wrong for making assumptions or:
You still have a great imagination and don't share your patches with reasons
PS. If you were looking for bite. You got it
If anyone else thinks I should have dealt with the situation differently. Tell me and I'll consider it.
I love this SO much. Haven't been much of a redstone guy but noticing the great changes this brings to it, I have more of a drive to dive into it. Thanks
Am I to take your "You don't want to share" as an I want patch please?
I would appreciate a reply along the lines of sorry I was wrong for making assumptions or:
You still have a great imagination and don't share your patches with reasons
PS. If you were looking for bite. You got it
If anyone else thinks I should have dealt with the situation differently. Tell me and I'll consider it.
I only want to say: I really, really REALLY want that patch for optimine! please.
(and... hmmm... MC extended is not comp. with forge... *nudge, nudge*)
your fault that your name contains a word no one knows but is nearly like a word everyone knows :3
It's forcing that to happen, well not the right and wrong in the same post part but you get it I guess ^^
And I admit, I would have written it wrong too :sad.gif: but both times (if mentioned 2 times)
When I created that name, I did not understand english. What's that word?
Is that an I was being sarcastic reply. IF so I appreciate that you didn't mean it but you didn't even sound sarcastic.
Try to treat all my messages as sarcasm. I'm usually not being sarcastic in three cases - suggesting something, explaining something posted by me in same post (screenshots of clock, for example) and helping genuine newbies. Spent too much in environment where sarcasm is a way of life.
I'm unsure if your whole name is a word but I'm sure you know what's a bar and handar is like hander so without looking close everyone will read Barhander : / maybe that could be a variation of bartender, dunno.
And no I'm not picking on your name, just explaining why it's possible that people write it wrong.
I know you're not picking, but problem is, even people who never been to English-speaking country are misspelling it, like their eyes cannot pick three "a"'s in a row.
Anyone know if it's possible to have a matrix of 5x5 Light Blocks next to each other and be able to power each one individually of the others?
with some creative cover plate usage you could isolate signals for what I am guessing you need. Remember that wires can be placed on the outside of cover plates. Have not tested with free-standing plates though, that might be different.
With a little creative coverplate tinkering I managed to get them all isolated, each row was then bundled together so I have 25 wires into 5 cables, this mod is astounding :biggrin.gif:.
I believe the light blocks can have the wire go right up to them, so the torches can be removed, which might eliminate some of the signal inversion you will get with that setup (based on what I can see anyways)
I've only used Barhandar's patch, so I'm not sure if Jay's added such a button. If that's the case, you may want to try Barhandar's instead and see if that solves the problem.
You can find it in this post. It doesn't add any buttons, it just makes TMI always display exactly what should be displayed (hiding the unusable duplicate IDs from the wiring 1.5.1 to 1.6.0 converter).
First, this patch and that patch are incompatible.
Second, since when Optimine and MinecraftForge are compatible?
He refers to patch from a different user that allows to toggle visibility of excluded IDs (Aether ones, for example).
Okay, so "Get the TMI patch on the forums" is leading to confusion about which TMI patch to get. Joy and puppies.
Also when placing cover plates and destroying components can you make the reach distance compatible with Single Player Commands /reach?
Since I made it so. XD but I haven't released that patch so I don't know what he's on.
Suggetion: The smaller width wire takes the exterior corner.
Bundled cables will only have exterior corners to other bundled cables.
RedWire to RedWire doesn't matter as look the same. Also with insulated.
Inslated cables will only have exterior corenrs to other insulated wires of the same colour or bundled cables.
That will fix up that unsightly visual glitch :smile.gif:.
I'm just posting here as I notice something... There was something else but I forgot
With seperate cable backbone and logic structure.
I use MCEdit to copy the cable backbone multiple times.
Fill with the desired colour cable.
Use MCEdit to surround backbone with logic.
So easy and compact.
No image present. Either you have serious case of imagination, or don't want to share, as evidented by all your non-released fixes.
Okay Mr Smarty Pants. Images take time and I have a busy schedule. But here.
Test area
Binary ->
BCD converter7 seg. My bcd is in the bottom of the above imageDecimal Shift/Input Register
Display
I have a very limited imagination. I'm going to quote you when I make a video showing my 5 digit multiple combination lock with 7seg display. And then my ALU and then my CPU.
As for the patches...
My idea is, "Hey guys I made a patch for TMI (all in one) and Optimine/OptiFog for MCF".
Am I to take your "You don't want to share" as an I want patch please?
I would appreciate a reply along the lines of sorry I was wrong for making assumptions or:
You still have a great imagination and don't share your patches with reasons
PS. If you were looking for bite. You got it
If anyone else thinks I should have dealt with the situation differently. Tell me and I'll consider it.
I only want to say: I really, really REALLY want that patch for optimine! please.
(and... hmmm... MC extended is not comp. with forge... *nudge, nudge*)
Okay, now we got a person who doesn't understand sarcasm. I request you to join MF team.
When I created that name, I did not understand english. What's that word?
Is that an I was being sarcastic reply. IF so I appreciate that you didn't mean it but you didn't even sound sarcastic.
And I get sarcasm quirte nicely I just read with expression. And you post came across as your up yourself.
Ok then. MC extended, Well I'm not sure about that one since I've never used it. But maybe.
Unfortunately I have to go to bed now and then do my assignments. Like actually do them. Maybe tomorrow or the next day.
Try to treat all my messages as sarcasm. I'm usually not being sarcastic in three cases - suggesting something, explaining something posted by me in same post (screenshots of clock, for example) and helping genuine newbies. Spent too much in environment where sarcasm is a way of life.
I know you're not picking, but problem is, even people who never been to English-speaking country are misspelling it, like their eyes cannot pick three "a"'s in a row.
Also suggest variable not Gate, and "IF gate" oh lol...
Here is Vid....
Thx for attention.
Aslo buttons, levers red torches ot covers = MAD code... But useful...
My Ideas,My Minecraft Starter,My Easy Texture Pack Compiler,My Russian Translation,My BackUP Manager - My Easy Soft
with some creative cover plate usage you could isolate signals for what I am guessing you need. Remember that wires can be placed on the outside of cover plates. Have not tested with free-standing plates though, that might be different.
I believe the light blocks can have the wire go right up to them, so the torches can be removed, which might eliminate some of the signal inversion you will get with that setup (based on what I can see anyways)