This may be a bit late, but I'll post up some pictures of helmets on my file share.
Just post what you need, and I'll put up about 4 shots of whatever body piece you need.
This may be a bit late, but I'll post up some pictures of helmets on my file share.
Just post what you need, and I'll put up about 4 shots of whatever body piece you need.
I'll just need the sides, top, and back veiws of the CQC, EOD, and security helms.
Those I really need since I only have the refs showing mostly the front veiw. If you can send me those that will be awesome!
I can't help you with Security, I'm only a commander, but I guess I could shell out about 20,000 Credits then. I'm assuming you don't need attachments?
Well Guys I'm back, and I have a cool story to tell. See, during the weekend I was up in the Sierras, in Twainheart to be exact, while it was snowing. Sounds fun right? Well yes, and no. You see, It was snowing pretty hard when we were heading up the mountain, and the roads up th our friend's cabin where COVERED in almost a foot of snow. We were just about less than a mile from their cabin when one of our chains broke, and then we had to push the car up. It worked a bit, but my dad had to stop when he was getting too far ahead for us to keep up. Later we got stuck and waited for 2 HOURS for AAA to get us until we said F' it and just drove up the rest of the way sine the locals plowed most of the road while we were waiting. Lets just say we were glad to get into the nice warm cabin and in a bed at 1 in the morning!
And that's not the end of it either. We were suppose to be heading back home Sunday in the afternoon, but it snowed so much that the roads were covered to the point that we had to wait a day until the snow let up and it gets plowed. Sounds easy right, an extra day in the nice snowy mountains? Yes, until the power went out Sunday morning. So a whole day with no power, and a morning too. It was... ok I guess, but the fact we had to dry our clothes by the fire, but fortunately I had my Gameboy SP with me and Metroid Fusion to help me pass the time, which I was able to beat In that one day! XD
Now I think you get the rest, it was the first time I got to see snow In almost a decade, and now that I have, along with the survival scenario, and digging our driveway out of almost 3 feet of snow, but the plow comes daily and it helped out with the actual road, and with one chain... and now I'm here!
So, I hoped you guys enjoyed the little story, and that you guys are eager for more skins! And I can assure you guys, I did miss Minecraft. I'm just glad I got back in one piece, and that there isn't a whole ton of people asking for skins while I was gone.
And now, back to skinning! =D
Hey again,
Just for people to know, I am now supporting HypnoprisM's Halocraft! So now I'll be letting him use my skins in his texture pack. So for those who want to check this out, the link to his thread is here: viewtopic.php?t=160190
Hopefully this makes it easier on him to have some good looking spartan skins. I'll make elites when I have the time and the ref. pics for them!
I'm also thinking about making a banner for this thread. So if anyone likes to help with that, Please pm me and we can discus on what it's going to look like! It would be awesome if someone did.
And Jec10, please reply to my pm so I can get your skin done.
I've got a question for you guys that I'd like to ask you. I've recently been working on a Reach-version CQB, and looking at the ref. pics I wasn't sure how I was going to put the stuff that "sticks out" for the helm, or just not have any whatsoever. So before I release it, I'd like you guys to have a look at 2 versions I've made for the CQB.
Here's what I have:
Version A (Like the halo 3 CQB)
Version B
Head: Skull EVA [Emile]
Body: Collar Breacher (robot arm on right arm if possible)
Shoulders (left/right): Mark V (only on left shoulder if possible)
Colors (Primary and secondary): Steel primary and Red secondary
Visor Color: Black
New stuff!
Mark V(:cool.gif: UA:
Tactical/LRP chest:
COMMANDO SHOULDERS:
And new additions to the First post are knees and forearms, heres what I have for you guys so far;
UA/Buckler forearms:
and,
FJ/PARA knees: (Never thought I would have to make these since of the design of my skins, but I can see how they can work now.)
and just in case:
Default Legs:
Default Forearms arms:
Hope you guys like 'em. =)
Hey Hellraft! A HUGE thanks for the skin!
& I can't believe that you actually made new parts just for my skin!
So thanks alot for that much detail on my skin!
Here, diamonds for you!
Head: Skull EVA (Emile)
Body: Collar Breacher
Shoulders: Mark V
Colors (Primary/secondary): Primary: Black. Secondary: Red.
Visor color: Black
Forearms: Default
Knees: FJ/ PARA
Wow this has been a busy week for me. So now after about finished with the latest submissions I Have some more new Parts to add!
First off;
The Grenadier UA:
Grenadier UA/FC:
And now some new forearms!
Tactical/UGPS:
Assault Breacher:
I'm not sure if that's all of them, but the ones I managed to remember to post pics of. I'll have to go searching around for things I may have missed, since it has happened before, and I'll have another post later today/tomorrow or later then that whenever I get more submissions.
I'm still working on the CQB helm, I really need some feedback on those pics!
Quote from Hellcraftjz »
I've got a question for you guys that I'd like to ask you. I've recently been working on a Reach-version CQB, and looking at the ref. pics I wasn't sure how I was going to put the stuff that "sticks out" for the helm, or just not have any whatsoever. So before I release it, I'd like you guys to have a look at 2 versions I've made for the CQB.
Here's what I have:
Version A (Like the halo 3 CQB)
Version B
Which do you think looks better?
So please do so I can figure out what looks better, So when I "do" post it I don't get any bad feedback on the helm looking "Not accurate" or just looking bad period!
So guys, cya next time!
Another short update for everyone. I will now accept Pics of your spartans for submissions!
Also, another thing to add to the first post:
The Grenadier knees:
Wow this has been a busy week for me. So now after about finished with the latest submissions I Have some more new Parts to add!
First off;
The Grenadier UA:
Grenadier UA/FC:
And now some new forearms!
Tactical/UGPS:
Assault Breacher:
I'm not sure if that's all of them, but the ones I managed to remember to post pics of. I'll have to go searching around for things I may have missed, since it has happened before, and I'll have another post later today/tomorrow or later then that whenever I get more submissions.
I'm still working on the CQB helm, I really need some feedback on those pics!
Quote from Hellcraftjz »
I've got a question for you guys that I'd like to ask you. I've recently been working on a Reach-version CQB, and looking at the ref. pics I wasn't sure how I was going to put the stuff that "sticks out" for the helm, or just not have any whatsoever. So before I release it, I'd like you guys to have a look at 2 versions I've made for the CQB.
Here's what I have:
Version A (Like the halo 3 CQB)
Version B
Which do you think looks better?
So please do so I can figure out what looks better, So when I "do" post it I don't get any bad feedback on the helm looking "Not accurate" or just looking bad period!
So guys, cya next time!
Your work is excellent.
in response to you CQB question, i think version A looks better -- less square.
your grenadier helmets look great (especially UA)
more on topic, have you tried to make any elites? Sangheili skins seem to be harder to make than spartan skins
so i was wondering if you'd be willing to try your hand at it.
if u dont have minecraft y r u on the fourms for minecraft :tongue.gif:
Just post what you need, and I'll put up about 4 shots of whatever body piece you need.
The awesome content that one can find in these forums never ceases to amaze me.
Have a Doymond
I'll just need the sides, top, and back veiws of the CQC, EOD, and security helms.
Those I really need since I only have the refs showing mostly the front veiw. If you can send me those that will be awesome!
They're right here,
http://www.bungie.net/Stats/Reach/FileShare.aspx?player=Bartlomit
Hope they help!
And that's not the end of it either. We were suppose to be heading back home Sunday in the afternoon, but it snowed so much that the roads were covered to the point that we had to wait a day until the snow let up and it gets plowed. Sounds easy right, an extra day in the nice snowy mountains? Yes, until the power went out Sunday morning. So a whole day with no power, and a morning too. It was... ok I guess, but the fact we had to dry our clothes by the fire, but fortunately I had my Gameboy SP with me and Metroid Fusion to help me pass the time, which I was able to beat In that one day! XD
Now I think you get the rest, it was the first time I got to see snow In almost a decade, and now that I have, along with the survival scenario, and digging our driveway out of almost 3 feet of snow, but the plow comes daily and it helped out with the actual road, and with one chain... and now I'm here!
So, I hoped you guys enjoyed the little story, and that you guys are eager for more skins! And I can assure you guys, I did miss Minecraft. I'm just glad I got back in one piece, and that there isn't a whole ton of people asking for skins while I was gone.
And now, back to skinning! =D
Just for people to know, I am now supporting HypnoprisM's Halocraft! So now I'll be letting him use my skins in his texture pack. So for those who want to check this out, the link to his thread is here: viewtopic.php?t=160190
Hopefully this makes it easier on him to have some good looking spartan skins. I'll make elites when I have the time and the ref. pics for them!
I'm also thinking about making a banner for this thread. So if anyone likes to help with that, Please pm me and we can discus on what it's going to look like! It would be awesome if someone did.
And Jec10, please reply to my pm so I can get your skin done.
That is all. =)
Head: Hayabusa
Body: Hayabusa
Shoulders: both Hayabusa
Colors: Primary white, secondary dark blue
Visor color: Gold
These skins are awesome
Here's what I have:
Version A (Like the halo 3 CQB)
Version B
Which do you think looks better?
Head: Skull EVA [Emile]
Body: Collar Breacher (robot arm on right arm if possible)
Shoulders (left/right): Mark V (only on left shoulder if possible)
Colors (Primary and secondary): Steel primary and Red secondary
Visor Color: Black
Thanks!
Mark V(:cool.gif: UA:
Tactical/LRP chest:
COMMANDO SHOULDERS:
And new additions to the First post are knees and forearms, heres what I have for you guys so far;
UA/Buckler forearms:
and,
FJ/PARA knees: (Never thought I would have to make these since of the design of my skins, but I can see how they can work now.)
and just in case:
Default Legs:
Default Forearms arms:
Hope you guys like 'em. =)
& I can't believe that you actually made new parts just for my skin!
So thanks alot for that much detail on my skin!
Here, diamonds for you!
I'll surely recommend my friends here!
Head: Skull EVA (Emile)
Body: Collar Breacher
Shoulders: Mark V
Colors (Primary/secondary): Primary: Black. Secondary: Red.
Visor color: Black
Forearms: Default
Knees: FJ/ PARA
Thanks.
http://www.minecraft...tal-core-skins/
First off;
The Grenadier UA:
Grenadier UA/FC:
And now some new forearms!
Tactical/UGPS:
Assault Breacher:
I'm not sure if that's all of them, but the ones I managed to remember to post pics of. I'll have to go searching around for things I may have missed, since it has happened before, and I'll have another post later today/tomorrow or later then that whenever I get more submissions.
I'm still working on the CQB helm, I really need some feedback on those pics!
So please do so I can figure out what looks better, So when I "do" post it I don't get any bad feedback on the helm looking "Not accurate" or just looking bad period!
So guys, cya next time!
Also, another thing to add to the first post:
The Grenadier knees:
Your work is excellent.
in response to you CQB question, i think version A looks better -- less square.
your grenadier helmets look great (especially UA)
more on topic, have you tried to make any elites? Sangheili skins seem to be harder to make than spartan skins
so i was wondering if you'd be willing to try your hand at it.
--Camo 7